DUNE HD CENTER Manual de início rápido - Página 8

Procurar online ou descarregar pdf Manual de início rápido para Leitor multimédia DUNE HD CENTER. DUNE HD CENTER 19 páginas.
Também para DUNE HD CENTER: Manual rápido (8 páginas)

Imprimir página

Playing Optical Discs

To play an optical disc, ensure you are on the main screen of the player menu and insert the optical disc

into the optical drive of the player. The player will recognize the optical disc, and will enable the item cor-

responding to the optical drive. Depending on the player settings, the player may also automatically start

the playback of the disc or request a conﬁ rmation to play the disc.

Connecting USB Drives

To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive

to an USB port of the player. The player will recognize the USB drive, and will show an item corresponding

to the USB drive on the main screen.

When connecting a USB drive requiring signiﬁ cant power (such as USB HDD), use an external power

supply for the USB drive. Power provided by the USB ports of the player may not be enough for correct

functioning of the USB drive.

Do not disconnect or switch off the USB drive when some write operation is in progress.

Using Internal HDD

To insert the internal 3.5" SATA HDD, ensure you are on the main screen of the player menu, open the

HDD rack door, insert the HDD into the HDD rack and close the HDD rack door. The player will recognize

the internal HDD, and will show an item corresponding to the internal HDD on the main screen of the

player menu.

Do not eject the internal HDD when some write operation is in progress.

It is recommended to use "green" HDD models with small RPM value, small heat emission, and small

power consumption; for more information, please see here:

http://dune-hd.com/support/hw_compat/

Using SD Memory Cards

To insert an SD memory card, ensure you are on the main screen of the player menu and insert the

memory card into the SD card slot of the player. The player will recognize the memory card, and will show

an item corresponding to the memory card on the main screen. Some SD memory cards may not be

recognized by the player or may work incorrectly; in such a case, use other models of SD memory cards.

Do not eject the SD memory card when some write operation is in progress.

Accessing Network Drives

To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player menu,

press the "MENU" RC button, and choose "Create Network Folder", then ﬁ ll the parameters of the network drive

as needed. The player will show an item corresponding to the conﬁ gured network drive on the main screen.

To browse the list of network resources accessible via SMB or UPnP protocols, use "Network Browser"

item on the main screen of the player menu. NOTE: If some network resources are not shown by the

player, you may need to wait some minutes and then retry (or press the "MENU" RC button and choose

"Refresh" command).

Formatting HDD

To format a HDD attached to the player, select the drive item on the main screen of the player menu, press

the "INFO" RC button and choose "Format Disk" (to format the entire disk) or "Format Partition" (or to for-

English