DUNE HD SOLO LITE Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Leitor multimédia DUNE HD SOLO LITE. DUNE HD SOLO LITE 16 páginas. Uhd 4k and hevc enabled iptv/vod/ott media player

Imprimir página

USER MANUAL

After you see a picture on the TV screen, press the "ENTER" RC button, and then go to the player setup

menu to perform a more precise configuration of the video output mode if needed.

NOTE: The procedure of quick setting of video output mode cannot be used during playback and in some

other cases. To ensure this procedure can be used, switch the player off, then switch the player on, and then

wait about 1 minute to ensure the player loading is finished. After that press "STOP" RC button to ensure

playback is stopped. Then use "REC" RC button.

Connecting USB Drives

To connect a USB drive, go to "Sources" section of the player menu and connect the USB drive to an USB

port of the player. The player will recognize the USB drive, and will show an item corresponding to the USB

drive on the main screen.

When connecting a USB drive requiring significant power (such as USB HDD), use an external power supply

for the USB drive. Power provided by the USB ports of the player may not be enough for correct functioning

of the USB drive.

Do not disconnect or switch off the USB drive when some write operation is in progress.

Formatting HDD

To format the HDD attached to the player, select the HDD item in "Sources" section of the player menu, press

the "INFO" RC button and choose "Format Disk" (to format the entire disk) or "Format Partition" (to format an

already existing disk partition only). Then choose the type of file system: if you want to use the HDD only with

the player, "EXT3" is typically a good choice; if you want to connect the HDD to a Windows PC, "NTFS" is

typically a good choice. The player will format the disk. To format an unformatted HDD, just press the

"ENTER" RC button on the HDD item.

NOTE: To use disks formatted by the player into "EXT2" or "EXT3" file system on a Windows PC, you may

need to install additional software on the PC, such as "EXT2FSD" (http://www.ext2fsd.com/).

Accessing Network Drives

To connect a network drive using SMB or NFS protocol, go to "Sources" section of the player menu, press

the "POP UP MENU" RC button, and choose "Create Network Folder", then fill the parameters of the

network drive as needed. The player will show an item corresponding to the configured network drive on the