Airway Morf Instruções para o utilizador

Procurar online ou descarregar pdf Instruções para o utilizador para Equipamento médico Airway Morf. Airway Morf 2 páginas. Nasal mask

Intended Use
The Morf Nasal Mask is intended to be used by individuals who
have been diagnosed by a Physician as requiring CPAP or Bi-Level
ventilator treatment. The Morf Nasal Mask is intended for single
patient adult(>66lb/30kg) use in the home, hospital or other
clinical setting.
Operating Instructions
The operating pressure range of the mask is 4-20cm H20.
The transport and storage temperature range of the mask is -20 to
50°C (40 – 122°F).
The operating temperature of the mask is 5-40°C (40 – 104°F).
Before each use:
- Make sure the air path through the mask is clear
- Inspect the vent holes. Do not use if blocked
- Inspect the mask for damage. Do not use if there are any visible
deterioration (tears, cracks etc), and seek replacement part(s).
Note: Failure to follow the operating instructions may compromise
the performance and safety of the mask.
Warnings
US Federal Law restricts this device to sale by, or on order of, a
physician.
This mask should only be used with CPAP/Bi-Level equipment
recommended by your physician or respiratory therapist. A mask
should not be used unless the CPAP/Bi-Level device is turned on
and operating properly. The vent holes of the mask should never be
blocked.
Explanation of warning: CPAP and Bi-Level machines are intended
to be used with special masks which have exhalation ports to allow
continuous flow of air out of the mask. When the CPAP/Bi-Level
machine is turned on and functioning properly, new air from the
CPAP/Bi-Level machine flushes the exhaled air out through the
exhalation ports. However, when the CPAP/Bi-Level machine is not
operating, enough fresh air will not be provided through the mask,
and exhaled air may be re-breathed. Re-breathing of exhaled air for
longer than several minutes can in some circumstances lead to
su ocation.
If oxygen is used with CPAP/Bi-Level machine, the oxygen flow
must turned o when the CPAP/Bi-Level machine is not operating.
Explanation of warning: When the CPAP/Bi-Level device is not in
operation, and the oxygen flow is left on, oxygen delivered into the
ventilator tubing may accumulate within the CPAP/Bi-Level
machine enclosure. Oxygen accumulated in the CPAP/Bi-Level
machine enclosure will create a risk of fire.
Do not use Polyvinyl Chloride (PVC) pressure and/or oxygen tubing.
Use silicone tubing instead.
Explanation of warning: Flexible PVC contains elements that can be
detrimental to the materials of the mask, and may lead to cracking
or breakage of mask components.
• `
Discontinue use if reaction occurs to any part of the mask and
consult physician.
Discontinue use if experiencing discomfort and consult physician.
Mask is single patient use.
Discontinue use of mask if damaged or cracked and seek
replacement.
Do not use mask if vomiting or feeling nauseous.
Do not use mask if patient is unable to remove mask by
themselves.
Use on adults only (>66lb/30kg).
Shake loose hot water o seal before placing on face for fitting.
Do not to misuse mask.
Only use the mask with approved CPAP or Bi-Level machine that
complies with ISO 17510-1 or ISO 14971.
Use a humidifier if experiencing nasal congestion or dry airway.
Do not store or transport the mask in temperatures outside of -20
to 50°C.
Electrically conductive breathing tubes should not be used (does
`
not apply to approved heated breathing tubes).
Combinations with other medical products can alter the
performance of the product, e.g. combinations with: humidifier for
medical use, nebulizer, heat and moisture exchanger (HME),
filters, CPAP, Bi-level positive airway pressure device,
self-adjusting sleep apnea breathing therapy device, or additional
oxygen supply.
User Instructions
Airway Management Contacts
Manufacturer
4300 Alpha Rd, Suite 115
Farmers Branch, TX 75244
Tel: (866) 264-7667
Fax: (214) 691-3151
Website: www.tapintosleep.com
80024 REV A
Patents: www.tapintosleep.com/patents