Casio 1506 Como se familiarizar - Página 2

Procurar online ou descarregar pdf Como se familiarizar para Ver Casio 1506. Casio 1506 3 páginas. Module

Imprimir página

VIVCEL

The VIVCEL function performs a vibration paging operation when your cell phone

receives a call. The vibration paging operation lasts for up to 10 seconds, or until you

press any watch button.

VIVCEL Settings

The following explains the settings you need to make to use the VIVCEL functions.

See "To make VIVCEL settings" for details on actually making the settings.

Cell Phone System

VIVCEL can be used with cell phones only. It cannot be used with other (non-cell)

telephones.

Cell phone system compatibility depends on your watch's "module" number, which

can be found on its back cover. The following shows telephone system compatibility

for each module.

Module 1506 (AMPS compatible)

Telephone System

Watch Setting

DIGTL

Digital cell phone

ANLOG

Analog cell phone

Digital/analog cell

DUAL

phone switching

• See the documentation that comes with your cell phone for information about which

type it is.

• Module 1507 may not be compatible with certain non-GSM network phone systems.

Paging Interval

Presetting a start time and end time defines the "paging interval". VIVCEL is activated

each day during the paging interval and deactivated outside the paging interval (as

long as VIVCEL is turned on). You can specify the hour only for these times, within

the range of 1 (1 o'clock) to 24 (midnight).

Sensitivity

The VIVCEL paging function operates by picking up signals from your cell phone.

The sensitivity setting determines how close a cell phone has to be from the watch for

it to pick up these signals.

Watch Setting

Approximate Distance

HIGH

1 meter (40 inches)

LOW

50 centimeters (20 inches)

To make VIVCEL settings

1. Hold down A while in the Timekeeping Mode until

the seconds digits start to flash on the display.

2. Press L to display the cell phone system setting

screen.

• At this time the current cell phone system indicator

(

DIGTL

DST

VIB

display.

3. Press R or F to scroll through the available cell

REV

MODE

FWD

phone system indicators until the one you want is

displayed.

4. Press M to advance to the start time setting screen.

• At this time the current start time setting flashes on

the display.

5. Press F to increase the time or R to decrease it.

DST

Holding down either button changes the start time

VIB

setting at high speed.

6. Press M to advance to the end time setting screen.

Start time

• At this time the current end time setting flashes on

the display.

7. Press F to increase the time or R to decrease it.

DST

VIB

Holding down either button changes the end time

setting at high speed.

8. Press M to advance to the sensitivity setting

screen.

• At this time the current sensitivity setting flashes on

the display.

DST

9. Press R or F to toggle between the sensitivity

VIB

settings.

10. After you make the settings you want, press A to return to the Timekeeping

Mode.

• Pressing M instead of A returns to the screen in step 2.

• If you do not operate any button for a few minutes while a selection is flashing, the

watch goes back to the Timekeeping Mode automatically.

Module 1507 (GSM compatible)

Telephone System

Watch Setting

GSM network cell

DIGTL

phone

Non-GSM network

ANLOG

cell phone

When to use

When your phone is in a pocket that is

away from the watch.

When your phone is located near the

watch.

When there are other cell phone users

nearby.

ANLOG

, or

DUAL

) flashes on the

To turn VIVCEL on and off

In the Timekeeping Mode, hold down F for about

Animation area

one second to toggle VIVCEL on (

animation area) and off (

• When VIVCEL is turned off, the animation area

shows a sleeping figure (

DST

• While VIVCEL is turned on, it becomes activated

VIB

when the current time is within the paging interval

defined by the VIVCEL start and end times. The

REV

MODE

FWD

animation area of the display shows a moving

antenna figure (

is activated. Outside the paging interval defined by

the VIVCEL start and end times, VIVCEL is

deactivated and the animation area of the display

shows a non-moving antenna figure (

VIVCEL Operation

Note that for VIVCEL to operate correctly, it must be

Paging Interval

turned on (by holding down F) and activated (the

current time is within the paging interval defined by

the VIVCEL start and end times).

• Pressing A in the Timekeeping Mode toggles the

DST

VIB

animation area between the day of the week and

the paging interval.

• The paging interval is indicated by a bar graph in

REV

MODE

FWD

the animation area. The nearby illustration indicates

a paging interval of 10 am to 11 pm.

• VIVCEL automatically activates and deactivates

during the defined paging interval.

Current time (flashing)

Manual VIVCEL Activation

Press R in the Timekeeping Mode to add two to the current paging interval hour and

round the minutes digits to zero. This means that if it is 10:58 p.m. when you press

R, the paging interval is extended up to 00:00 a.m. Each press of R adds two

hours, up to a total of eight hours.

• Pressing R while VIVCEL is deactivated (outside the paging period), activates

VIVCEL. The watch vibrates when VIVCEL is activated.

• The R button can be used to extend the paging interval for up to eight hours (four

R button operations).

• Any extension of the paging interval with the R button is automatically cancelled

whenever you turn off VIVCEL or change any of its settings.

VIVCEL Precautions

• Since VIVCEL operates by picking up signals from your cell phone, a paging

operation may also be triggered by an outgoing call or even while a call is in progress.

A paging operation can also be triggered by another cell phone or other device

operating on the same frequency as your cell phone.

• Any of the following conditions can cause interference with VIVCEL paging operations.

Obstruction between the watch and cell phone

LOW

Sensitivity set to

while the watch is located away from the cell phone

Use with a non-compatible telephone system

• Frequent use of VIVCEL paging can shorten battery life.

• Turn off VIVCEL before operating a motor vehicle or bicycle to avoid the

chance of accident caused by a paging operation while operating a vehicle.

WORLD TIME MODE

The World Time Mode shows the current time in 27

cities (29 time zones) around the world.

City code

Timekeeping in the World Time Mode

The current time in all the World Time zones is

calculated in accordance with the Greenwich Mean

DST

VIB

Time (GMT) differential for each zone, based on the

current home time setting in the Timekeeping Mode.

You can also turn Daylight Saving Time (DST) on or

REV

MODE

FWD

off separately for each time zone. Turning on daylight

saving time automatically advances the corresponding

Current time

time setting by one hour.

• The seconds count of the World Time is synchronized

Current time in

the selected city

with the seconds count in the Timekeeping Mode.

• The 12-hour/24-hour format of the World Time matches the format you select in the

Timekeeping Mode.

• With daylight saving time, clocks are set one hour forward in order to better take

advantage of daylight hours during the summer, when days are longer. Whether or

not daylight saving time is used depends on the country you are in.

To view the Time in Another Zone

Press F while in the World Time Mode to scroll forward through the city codes (time

zones) and R to scroll back.

• Holding down either button scrolls through the city codes at high speed.

• For full information on city codes, see the "CITY CODE TABLE" at the back of this

manual.

• The time zone that is displayed when you leave the World Time Mode will still be

displayed when you enter the World Time Mode again.

1506/1507-2

displayed in the

displayed).

) and

is displayed while VIVCEL