Dune 4WD 90215146 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Inversor Dune 4WD 90215146. Dune 4WD 90215146 4 páginas. 120w monocrystalline solar blanket
Imprimir páginaHow to connect the MPPT Controller to the Solar
Blanket
Note: Please ensure that you follow the below instructions, or this may void your warranty.
Step 1. Establish a connection between the MPPT Solar Controller and a battery, using the 50Amp
connector lead provided.
Step 2. Connect the Solar Blanket to the 50Amp Connector labelled "SOLAR" on the MPPT Solar
Controller. To disconnect, simply reverse the order of these steps.
The controller has reverse polarity protection internally, but if there is a connection error this may still
damage your controller.
(Please make sure the voltage and current are within the rated range of controller.)
Once the MMPT Solar Controller is connected at both ends the charging process starts.
MPPT Solar Controller
Indicators
Solar: when the solar indicator is constantly ON, the controller is in the state of charging. When the solar
indicator flickers, the controller is in the state of float charge.
Load Indicator: When the load indicator is constantly ON, output to load is available.
Battery: the battery indicator turns on when a battery is connected with and detected by this MPPT solar
controller.
Specifications
Rated charge current
Rated discharge current
Rated voltage
MPPT efficiency
Over load, short circuit
protection
No load current
Over voltage protection
Voltage of stop charging
Discharge recovery
voltage
Over discharge voltage
USB output
Working temperature
Dimension of controller
Packing dimension
Weight
10A
10A
12V/24V auto work
Max:99%
≥1.5 rated current
＜10mA
16V; ×2/24V
14.7V; ×2/24V
12.0V; ×2/24V
10.8V; ×2/24V
5V 1A
-35℃~+55℃
CPS:131×99.5×34(mm)（L×W×H）
CPY:131×99.5×29.5(mm)（L×W×H）
150×123×45(mm)（L×W×H）
275g