Casio 2329 Manual - Página 2

Procurar online ou descarregar pdf Manual para Ver Casio 2329. Casio 2329 2 páginas.

Imprimir página
Casio 2329 Manual
STOPWATCH MODE
The Stopwatch Mode has a capacity of 9 hours, 59 minutes, 59 seconds. You can
also record lap times and split times, which are recorded in memory for later recall in
the Recall Mode.
Minutes
1/100 second
Seconds
Elapsed time is measured in 1/100 second units up to 59' 59" 99. After that, it is
measured in 1 second units.
About Laps and Splits
Lap Time
A lap time is the amount of time it takes for you to get from one point to
another during a race. When running on a track, for example, you can time
how long it takes you to complete each lap.
Split Time
A split time is the time from the start of a race until the point that the split is
measured. For example, you could measure split times to determine how
long it takes for you to get from the starting line to the 5-kilometer mark, the
10-kilometer mark, etc.

To measure elapsed time

The following operation is the same regardless of whether you want to record lap
times or split times.
1. Press A to start the stopwatch.
2. Press A to stop the stopwatch.
You can restart and stop the measurement operation whenever you want by press-
ing A again.
3. Press C to clear the stopwatch to all zeros (00' 00" 00).
To record a lap time
1. In the Recall Mode, use A to select lap time as the timing operation.
See "RECALL MODE" for more information about selecting the stopwatch opera-
tion.
2. Enter the Stopwatch Mode, and then press A to start the stopwatch.
3. Press C to freeze the lap time and display the lap number for about six seconds.
Stopwatch timing continues internally.
The first nine lap times you record are stored in memory. The final time you record
when you press C is also stored, for a total of 10 times.
If you continue to perform the lap time operation after
1/100 second
there are already nine times in memory, the lap times
Seconds
are shown on the display but are not stored into memory.
You can perform up to 99 lap time operations (9 stored
Minutes
+ 90 unstored) during each elapsed time operation.
You can recall lap times using the Recall Mode.
4. Press A to stop the time measurement.
5. Press C to clear the stopwatch to all zeros.
To record a split time
1. In the Recall Mode, use A to select split time as the
timing operation.
See "RECALL MODE" for more information about se-
Lap number
lecting the stopwatch operation.
2. Enter the Stopwatch Mode, and then press A to start
LAP indicator
the stopwatch.
3. Press C to freeze the split time and display the split
number for about six seconds. Stopwatch timing con-
tinues internally.
The first nine split times you record are stored in memory.
1/100 second
The final time you record when you press C is also
Seconds
stored, for a total of 10 times.
If you continue to perform the split time operation after
Minutes
there are already nine times in memory, the split times
are shown on the display but are not stored into memory.
You can perform up to 99 split time operations (9 stored
+ 90 unstored) during each elapsed time operation.
You can recall split times using the Recall Mode.
4. Press A to stop the time measurement.
5. Press C to clear the stopwatch to all zeros.
To record multiple finishes
1. In the Recall Mode, use A to select split time as the
Split number
timing operation.
See "RECALL MODE" for more information about
SPL indicator
selecting the stopwatch operation.
2. Enter the Stopwatch Mode, and then press A to start
the stopwatch.
3. Press C as each runner finishes. The finish time and
1/100 second
sequence number remains on the display for about six
Seconds
seconds. Stopwatch timing continues internally.
Minutes
The first nine split times (finish time) you record are
stored in memory. The final time you record when you
press C is also stored, for a total of 10 times.
If you continue to perform the split time operation after
there are already nine times in memory, the split times
are shown on the display but are not stored into memory.
You can perform up to 99 split time operations (9 stored
+ 90 unstored) during each elapsed time operation.
You can recall split times using the Recall Mode.
4. Press A to stop the time measurement.
5. Press C to clear the stopwatch to all zeros.
Sequence number
After the first hour
Hours
Seconds
Minutes
RECALL MODE
Use the Recall Mode to recall the lap times and split times stored in memory.
Press A to toggle the display between lap times and split times.
Press C to scroll through Recall Mode records.
Starting a new elapsed time operation in the Stopwatch Mode automatically clears
the data (lap or split) that is currently displayed in the Recall Mode.
1/100 second
Seconds
Minutes
Lap number
LAP indicator
[LAP time display]

ALARM MODE

When a Daily Alarm is turned on, the alarm sounds for
Mode indicator
about 20 seconds at the preset time each day. Press any
Minutes
button to stop the alarm after it starts to sound. When the
Hour
Hourly Time Signal is turned on, the watch beeps every
hour on the hour.
To set the alarm time
1. Hold down A while in the alarm Mode, until the hour
digits starts to flash on the display, indicating the set-
ting screen. The alarm is automatically turned on at this
time.
2. Press B to change the selection in the sequence shown
Current time
below.
Daily Alarm indicator
Hourly Time Signal
indicator
3. Press C to increase the selected digits. Holding down C changes them at high
speed.
4. After you make the settings you want, press A to exit the input screen.
The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To turn a daily Alarm and the Hourly Time Signal on and off
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
Both OFF
Daily Alarm
Only
To test the alarm
Hold down B in any mode (except when making any settings) to sound the alarm.
Note that this operation also changes the mode.
2329-2
1/100 second
Seconds
Minutes
Split number
SPL indicator
[SPLIT time display]
Hour
Minutes
Hourly Time
Both ON
Signal Only