Danfoss 140F1070 Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Termostato Danfoss 140F1070. Danfoss 140F1070 12 páginas. Electronic thermostat -10 to +10 c

Imprimir página

DEVIreg™ 330 (-10 to +10°C)

Protection class

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

Please also note the following:

• The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

• The thermostat must be connected to a power supply

via an all-pole disconnection switch.

• The sensor is to be considered as live voltage. Have this

in mind if the sensor must be extended.

• Always connect the thermostat to continuous power

supply.

• Do not expose the thermostat to moisture, water, dust,

and excessive heat.

Installation Guide

Class II -

86 x 36 x 58 mm

83 g