Danfoss 140F1072 Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Termostato Danfoss 140F1072. Danfoss 140F1072 12 páginas. Electronic thermostat +5 to +45 c

Imprimir página

DEVIreg™ 330 (+5 to +45°C)

Protection class

Dimensions

Weight

The product complies with the EN/IEC Standard "Automatic

electrical controls for household and similar use":

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-9 (thermostat)

1.2

Safety Instructions

Make sure the mains supply to the thermostat is turned off

before installation.

IMPORTANT: When the thermostat is used to control a

floor heating element in connection with a wooden floor or

similar material, always use a floor sensor and never set the

maximum floor temperature to more than 35°C.

Please also note the following:

• The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

• The thermostat must be connected to a power supply

via an all-pole disconnection switch.

• The sensor is to be considered as live voltage. Have this

in mind if the sensor must be extended.

Installation Guide

Class II

86 x 36 x 58 mm

83 g