Danfoss 1C Manual de instalação - Página 6

Procurar online ou descarregar pdf Manual de instalação para Termostato Danfoss 1C. Danfoss 1C 16 páginas.

Please also note the following:

• The installation of the thermostat must be done by an

authorized and qualified installer according to local

regulations.

• The thermostat must be connected to a power supply

via an all-pole disconnection switch.

• The sensor is to be considered as live voltage. Have

this in mind if the sensor must be extended.

• Always connect the thermostat to continuous power

supply.

• Do not expose the thermostat to moisture, water,

dust, and excessive heat.

Mounting Instructions

Please observe the following placement guidelines:

Place the thermostat at a suitable height on

the wall (typically 80-170cm.).

In wet rooms, always place the thermostat

according to local regulation on IP classes.

Danfoss ECtemp 532

Installation Guide