Casio 2568 Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Ver Casio 2568. Casio 2568 5 páginas.
Também para Casio 2568: Manual do utilizador (5 páginas)
To test the alarm
• In the Alarm Mode, hold down D to sound the alarm.
To turn Alarms 2 2 2 2 2 through 5 5 5 5 5 and the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select a one-time alarm
(alarm number 2 through 5) or the Hourly Time Signal.
2. Press A to toggle it on and off.
• The on/off status of Alarms 2 through 5 and the Hourly
Time Signal is shown by indicators along the bottom of
the displays.
• The alarm on indicators and Hourly Time Signal on
indicator are displayed in all modes.
• While an alarm is sounding, the applicable alarm on
Alarm on
indicator
indicator flashes on the display.
Hourly time signal
on indicator
To select the operation of Alarm 1 1 1 1 1
1. In the Alarm Mode, use D to select Alarm1.
2. Press A to cycle through the available settings in the sequence shown below.
Snooze on indicator and Alarm1 1 1 1 1 on indicator
Press A.
One-time alarm on
Snooze alarm on
• The snooze on indicator and Alarm1 on indicator are displayed in all modes.
• The snooze on indicator flashes during the 5-minute intervals between alarms.
• The alarm indicator (Alarm1 on and/or snooze on) flashes while the alarm is
sounding.
Day Counter
Timekeeping
The Day Counter lets you count the number of days from
Mode time
the Timekeeping Mode's current date to a specific target
Text area
date.
• There are five Day Counter records, each of which can
be set with its own text and target date (year, month,
day).
• When the target date falls before the current date (as
kept in the Timekeeping Mode), the number of days is
displayed as a negative value.
Year
Target date
• Whenever the date specified by any one of the Day
(Alternate at
Counters matches the date of the Timekeeping Mode
the 1-second
Month –
(regardless of the Day Counter's year setting), the DAYS
interval)
Day
indicator flashes on the Timekeeping Mode and Day
Counter Mode.
Number of days
DAYS indicator
• The initial default target date when you purchase the watch, after you have its
battery replaced, or when battery power drops to Level 5 is January 1, 2001.
• The characters you can input for the text depend on the language you select in the
Timekeeping Mode. See "To set the time and date" for more information. Changing
the language setting does not affect texts that are already stored.
• All of the operations in this section are performed in the Day Counter Mode, which
you enter by pressing C.
To create a new Day Counter record
1. In the Day Counter Mode, use D to scroll through the
Day Counter records until the one you want is on the
display.
2. Hold down A until the flashing cursor appears in the
text area of the display, which indicates the setting
screen.
3. Press C to move the flashing in the sequence shown
below.
Character 1
Day
4. While the cursor is in the text area, use B and D to cycle through characters at
the cursor position. The characters cycle in the sequence shown below.
Press D.
to
(space)
(alphabet)
Press B.
• The above character sequence is for English input. See "Character List" for the
character sequences of other languages.
5. When the character you want is at the cursor position, press C to move the cursor
to the right.
6. Repeat steps 4 and 5 until the name is complete.
• You can input up to eight characters for the text.
7. After you input the text, press C as many times as necessary to move the cursor
to the target date.
• When the cursor is located at the eighth space of the text area, moving the cursor
to the right causes it to jump to the year setting. When the cursor is at the day
setting, moving it to the right (by pressing C) causes it to jump to the first
character in the text.
8. While the year, month, or day setting is flashing, use D (+) and B (–) to change
the setting.
• You can set a target date in the range of January 1, 1940 to December 31, 2039.
9. After everything is the way you want, press A to exit the setting screen.
• The text can show only three characters at a time, so longer text scrolls continuously
from right to left. The last character is indicated by the symbol
Note
• Use the above procedure to edit Day Counter records, too.
To recall Day Counter records
In the Day Counter Mode, use D to scroll through the Day Counter records.
USER'S GUIDE 2568
Alarm off
Text area
Character 2
Character 8
Target date
Month
Year
to
to
(symbol)
(number)
after it.
To delete a Day Counter record
1. In the Day Counter Mode, scroll through the records and display the one you want
to delete.
2. Hold down A until the flashing cursor appears on the display.
3. Press B and D at the same time to delete the record.
• The message CLR appears to indicate that the record is being deleted. After the
record is deleted, the cursor appears on the display and Timekeeping Mode
current date is set as the target date, ready for input.
4. Input data or press A to exit the setting screen.
Stopwatch
The stopwatch lets you measure elapsed time, split times,
Timekeeping
and two finishes.
1/100 second
• The display range of the stopwatch is 23 hours, 59
Mode time
minutes, 59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• Exiting the Stopwatch Mode while a split time is frozen
Hours
on the display clears the split time and returns to
Minutes
elapsed time measurement.
Seconds
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C.
To measure times with the stopwatch
Elapsed Time
D
➤
D
➤
D
Start
Stop
Re-start
Split Time
D
A
➤
A
➤
Start
Split
Split release
(SPL displayed)
Two Finishes
D
➤
A
➤
D
Split
Stop
First runner
Second runner
finishes.
finishes.
Display time of
first runner.
Countdown Timer
The countdown timer can be set within a range of 1
Timekeeping
minute to 24 hours. An alarm sounds when the countdown
Mode time
reaches zero.
• Countdown timer functions are available in the
Countdown Timer Mode, which you enter by pressing
C.
To set the countdown start time
1. In the Countdown Timer Mode, hold down A until the
Hours
Minutes
hour setting of the countdown start time starts to flash,
Seconds
which indicates the setting screen.
2. Press C to move the flashing between the hour and minute settings.
3. While a setting is flashing, use D (+) and B (–) to change it.
• To set the starting value of the countdown time to 24 hours, set 0:00.
4. Press A to exit the setting screen.
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
• When the end of the countdown is reached, the alarm sounds for 10 seconds or until
you stop it by pressing any button. The countdown time is automatically reset to its
starting value after the alarm stops.
• Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown.
• To completely stop a countdown operation, first pause it (by pressing D), and then
press A. This returns the countdown time to its starting value.
• The countdown timer measurement operation continues even if you exit the
Countdown Timer Mode.
Backlight
The backlight uses an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark. The watch's auto light switch automatically turns on
the backlight when you angle the watch towards your face
in the dark.
• The auto light switch must be turned on (indicated by
the auto light switch on indicator) for it to operate.
Auto light switch
• See "Backlight Precautions" for other important
on indicator
information about using the backlight.
To turn on the backlight manually
In any mode, press B to illuminate the display for about one second.
• The above operation turns on the backlight regardless of the current auto light
switch setting.
About the Auto Light Switch
Turning on the auto light switch causes the backlight to turn on for about one second,
whenever you position your wrist as described below in any mode. Note that this
watch features a "Full Auto EL Light," so the auto light switch operates only when
available light is below a certain level. It does not turn on the backlight under bright
light.
Moving the watch to a position that is parallel to the ground and then tilting it
towards you more than 40 degrees causes the backlight to turn on.
Parallel to
ground
➤
D
➤
A
Stop
Clear
➤
D
➤
A
Stop
Clear
A
➤
A
➤
Split release
Clear
Display time of
second runner.
More than
40 °
3