Casio 2733 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Ver Casio 2733. Casio 2733 5 páginas. Casio

Imprimir página

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

flash, which indicates the setting screen.

3. Use D (+) and B (–) to adjust the analog setting as

described below.

Current time

When you want to do this:

Press D.

Move the hand setting

forward 20 seconds

Press B.

Move the hand setting back

20 seconds

Hold down D.

Move the hand setting a short

Release D when the hands reach the setting

way forward at high speed

you want.

Hold down B.

Move the hand setting a

Release B when the hands reach the setting

short way back at high speed

you want.

While holding down D to move the hands at

Move the hand setting a

high-speed, press B to lock the high-speed

long way forward at high

speed

hand movement.

Press any button when the hands are close to

the setting you want.

Hand movement stops automatically if the hour

hand makes one full (12-hour) revolution.

While holding down B to move the hands at

Move the hand setting a long

high-speed, press D to lock the high-speed

way back at high speed

hand movement.

Press any button when the hands are close to

the setting you want.

Hand movement stops automatically if the hour

hand makes one full (12-hour) revolution.

4. Press A to exit the setting screen.

The minute hand will be adjusted slightly to match the seconds when you exit the

setting screen.

To return to the Timekeeping Mode, press C.

World Time

The World Time shows the current time in 30 cities (29

Current time in the

time zones) around the world.

selected city code

• If the current time shown for a city is wrong, check your

Home City time settings and make the necessary

changes.

• The watch will perform a signal receive operation even if

it is in the World Time Mode when a calibration time is

reached. If this happens, the World Time Mode time

settings will be adjusted in accordance with the

Timekeeping Mode's Home City time.

City Code

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time in another city

While in the World Time Mode, press D to scroll through the city codes (time zones).

• For full information on city codes, see the "City Code Table."

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A to toggle Daylight Saving Time (DST

DST indicator

displayed) and Standard Time (DST not displayed).

Note that you cannot use the World Time Mode to

change the DST setting of the Home City code you

currently have selected in the Timekeeping Mode. See

"Daylight Saving Time (DST)" for information about

turning the Home City code DST setting on and off.

The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

Alarms

The Alarm Mode gives you a choice of four one-time

Alarm time

alarms and one snooze alarm. One of the one-time

(Hour : Minutes)

alarms functions as a "target alarm," which counts the time

remaining from the current Home City time to the target

alarm time.

Also use the Alarm Mode to turn the Hourly Time Signal

on and off.

• There are five alarms named

(target alarm), and

Alarm name

snooze alarm only. Alarms

TAL

can be used as one-time alarms only.

• Alarm settings (and Hourly Time Signal settings) are

available in the Alarm Mode, which you enter by

pressing C.

USER'S GUIDE 2733

Perform this button operation:

AL1

AL2

AL3

TAL

SNZ

. You can configure

SNZ

as a

AL1

AL2

AL3

, and

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

A L 1

S I G

2. After you select an alarm, hold down A until the hour

setting of the alarm time starts to flash, which indicates

the setting screen.

This operation automatically turns on the alarm.

3. Use C to move the flashing in the sequence shown

below to select other settings.

Hour

4. While the hour or minute setting is flashing, use D (+) and B (–) to change it.

5. Press A to exit the setting screen.

• With the target alarm (

TAL

), the time starts to countdown as soon as you set the

alarm time.

Countdown

(Hours : Minutes)

2 seconds

Target Alarm Screen

Note

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off.

The target alarm counts the time remaining from the current Home City time to the

target alarm time.

• Pressing any button stops the alarm tone operation.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the alarm setting screen

To test the alarm

• In the Alarm Mode, hold down D to sound the alarm.

To select the alarm operation type

1. In the Alarm Mode, use D to select the screen for the

alarm (

AL1

alarm type you want to select.

2. Press A to cycle through the available settings in the

sequence shown below.

Alarm/

Alarm on indicator

Snooze off

The alarm on indicator (ALM) or snooze on indicator

(SNZ) is displayed for each alarm (

TAL

SNZ

• The snooze on indicator (SNZ) flashes during the 5-

minute interval between alarms.

• The alarm on indicator (ALM) and snooze on indicator

Snooze on indicator

(SNZ) are displayed in all modes.

• In all modes, the alarm on indicator is shown for any

alarm (

AL1

currently turned on.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal (

SIG

2. Press A to toggle it on (SIG displayed) and off (SIG

not displayed).

• The Hourly Time Signal on indicator (SIG) is displayed

in all modes when the Hourly Time Signal is turned on.

Hourly time signal

on indicator

Date Alert

Date Alert helps you to remember an important date. After you set an alert date

(month and day), a date alert indicator (!) and the current date flash for 24 hours after

the alert date arrives in the Timekeeping Mode. You can set up to five different date

alerts.

Alert date

(Month–Day)

Alert name

Date Alert Mode Screen

A L 2

A L 3

S N Z

T A L

Minutes

Countdown

(Seconds)

AL2

AL3

TAL

, or

SNZ

) whose

Alarm/

Snooze on

AL1

AL2

AL3

) for which alarm on is selected.

AL2

AL3

TAL

SNZ

) that is

Current date

(Month–Day)

Date alert on

indicator

Timekeeping Mode Screen