Danfoss ECtemp 610 Manual de instalação - Página 5
Procurar online ou descarregar pdf Manual de instalação para Termostato Danfoss ECtemp 610. Danfoss ECtemp 610 16 páginas. Electronic thermostat ip44
Imprimir página
ECtemp 610
Dimensions
Weight
The product complies with the EN/IEC Standard "Automatic
electrical controls for household and similar use":
•
EN/IEC 60730-1 (general)
•
EN/IEC 60730-2-9 (thermostat)
1.2
Safety Instructions
Make sure the mains supply to the thermostat is turned off
before installation.
Please also note the following:
•
The installation of the thermostat must be done by an
authorized and qualified installer according to local
regulations.
•
The thermostat must be connected to a power supply
via an all-pole disconnection switch.
•
The sensor is to be considered as live voltage. Have
this in mind if the sensor must be extended.
•
Always connect the thermostat to continuous power
supply.
•
Do not expose the thermostat to moisture, water,
dust, and excessive heat.
Installation Guide
100 x 69,5 x 45 mm
165 g
5