3UVIEW TB2 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para automóveis 3UVIEW TB2. 3UVIEW TB2 15 páginas. Vst taxi roof led display

Taxi roof led display connection

Wiring diagram of taxi roof led display

The main line is connected to the automobile battery, and the control line is connected to the fan

safety terminal or the ignition switch:

(1).+12V line is connected to the positive pole of the car head battery.

(2).GND line is connected to the negative pole of car head battery.

(3).The control end is connected to the ACC fuse of the fuse box or modiﬁed to the ignition switch.

Packaging and transportation of taxi roof led display

Carton packaging or pearl cotton + wooden box packaging

Features:

Damp proof and shockproof provide better protection for led vehicle mounted ceiling lamp screen.

Warning:

Before stacking or transporting wooden cases please check whether the wooden

cases and their ﬁxing screws are worn or damaged .

Before stacking or transporting wooden cases, please make sure that each wooden case

is in normal use.

Do not move the stacked wooden cases. When stacking, the lower wooden box shall be

ﬁxed to the ﬁnal position ﬁrst, and then place the upper box.

If the wooden case is broken, the wooden case must be bound ﬁrmly to avoid collapse of

the stack.

Use a suitable forklift to handle the wooden cases and take necessary precautions to

avoid personal injury.

DC12V input

↓

Control input

Main cable connect with car battery and

control cable connect with lighter position:

1.yellow(red) is with "+"

2.black is with "-"

3.lighter plug to the car lighter position,red

switch control panel delay power oﬀ.