Danfoss PAH 50 Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Bomba de água Danfoss PAH 50. Danfoss PAH 50 13 páginas. Pah series tap water pump disassembling and assembling
Também para Danfoss PAH 50: Manual de serviço (16 páginas), Manual de instruções (12 páginas)
Imprimir página
Assembly:
1.
Parts and tools required for assembly.
2. Check that all parts are OK. Replace all seals.
3.
Mount O-ring, guide and guide pins on port flange.
4. Mount valve plate in its right position using pin as guide.
8
5.
Mount housing using pin as guide.
6. Place housing and port flange near table edge and mount screws
from below.
7.
Mount thrust plate with sealings on cylinder barrel.
DKCFN.PI.011.NC3.02
521B1072