Dunlop L.312.C.M Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis Dunlop L.312.C.M. Dunlop L.312.C.M 18 páginas. Auxiliary air suspension

Imprimir página

Mercedes-Benz Sprinter 200/300

5.5 Tube Connection and Disconnection, Cutting and Routing

Connection and Disconnection

Tubes are connected as shown by the diagrams below...

Slide a nut over the end of the tube

Push the tube onto the connector as far as possible

Feed the nut up to the connector, fully tighten by hand and finally

tighten one additional turn using spanners

Cutting

To achieve good sealing and air-tight fitting of tube ends to their

connecting parts, it is very important to cut tubing cleanly and squarely.

A dedicated guillotine action tubing cutter is recommended, or a craft

knife if such a tool is not available. Do not use electrician's side cutters.

A dedicated tubing cutter -

Recommended

DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.

L.312.C.M

Electrician's Side Cutters

NOT Recommended

Volkswagen Crafter 28-35