Dunlop L.AMA.10.C.L Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis Dunlop L.AMA.10.C.L. Dunlop L.AMA.10.C.L 20 páginas. Volkswagen amarok air assist kits

Imprimir página

5.8 Spring Alignment

Spring out of alignment

mounting

offset

With the vehicle standing at the desired ride height, ensure that the

springs are correctly aligned as illustrated above and then tighten

the bolts to secure the bellow to both the upper and the lower

mounting brackets.

ii.

Always check if the air bellow won't touch any obstacle

5.9 Maintenance

Following installation, it is recommended that all metal parts are coated

with a protective substance such as body wax.

The system does not require very much maintenance other than...

to maintain air pressure in the springs. Much like a tyre, the system



may lose a little air over time.

to keep the air bellows clean. It is suggested that, when washing



the vehicle, the bellows are inspected and cleaned as necessary

(preferable by spraying).

trapped between convolutes, as this may damage the bellow.

Check before and after the winter period the wax coating. Re-wax



when necessarily

DUNLOP and the Flying D Device are trademarks of Dunlop International Group and are used under license by DSC Nederland B.V.

Volkswagen AMAROK

L.AMA.10.C.L

Spring

plate

axes

mounting plates parallel

and coaxial

Look in particular for stones or grit

alignment