Airwell AW-WHPMA08-91 Instalação e configuração - Página 9

Procurar online ou descarregar pdf Instalação e configuração para Ar condicionado Airwell AW-WHPMA08-91. Airwell AW-WHPMA08-91 15 páginas.

Set T4H2

This will give a weather compensated curve of 45 degrees flow temp

2 degrees outside and a Flow temp of 30 degrees at 1

outside

ambient air temprture

All change

Press Back

Change Room Thermos

Zone

Pre

To Activate the Weather Compensated Curve entered earlier, the next steps must be followed.

From the main screen press Menu button

Select Pre-set temperature and press

Go across to Weather Temp. Set

Scroll down to Zone1 H-Mode low temp,

Press the

Scroll right to the Number 9 and Confirm with

Press Back, until you return to the Home Screen.

The unit can be put into a Test mode, this is done through the SERVICEMAN menu accessed as above.

In the Test mode menu, there are a couple options that can be selected in this menu, these include testing of all Outputs.

This will allow the installer to check the unit has been wired correctly, there is also a handy air purge function within this menu.

We recommend that the air purge function is carried out before initially starting the unit. Please Find below the details

Enter SERVICEMAN mode using the password as

Detailed in the previous section.

Scroll down and Select Test Run with

W: www.aukdistribution.com

, set to

c ֯

s to selections must be confirme

lect Room Thermostat

tat to

ss Back Twice to return to the home screen

ON/OFF

button to turn on.

on carrying out this process.

T: 0191 516 6553

degrees

with

Test Mode