Dunster House ATLAS P5-3030PRG Manual de instalação - Página 10

Procurar online ou descarregar pdf Manual de instalação para Casas de jardim Dunster House ATLAS P5-3030PRG. Dunster House ATLAS P5-3030PRG 15 páginas. Pergola

Imprimir página

Panel CP1

60mm Screws

M10x110 Bolts

Step 1.

•

Position the Panel CP1 between the Posts as shown in the diagram below.

•

Join two (2) Panel CP1, using ten (5) 60mm screws.

•

Connect the two panels to the Posts (5 screws each) and to the Beams with two (2) 60mm screws per panel.

Please Note:

•

To fit the panel the braces has to be removed.

Please Note:

•

Fix the ends panel first and space the centre panel between them. (option to add sealant between the panel and

the post)

•

There maybe a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Atlas Pergola 3.2m x 3.2m

Full height wall panels assembly

2973

2733

M10 Shield Anchors

M10x28 Washers

View from inside

60mm Screw

120

•

M10 shield anchor

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

Fix the panels into the concrete base by

drilling

16 holes 80mm deep (2 per panel)

and inserting the shield anchors into the

holes.

Fix the panels by inserting M10x110mm

bolts

and M10 washers and tighten until

secure.

M10x110mm

bolt &washer

Panel

Concrete

Page 10