Dunster House H3-GS3X3MK2 Manual de instalação - Página 9
Procurar online ou descarregar pdf Manual de instalação para Mobiliário de exterior Dunster House H3-GS3X3MK2. Dunster House H3-GS3X3MK2 18 páginas. Gazebo 3m x 3m
Imprimir páginaUtopia 300 Gazebo 3m x 3m Installation Manual
Step 8
Components required:
Post Trim (70x35x350.C) (8 required)
70mm Screws (16 required)
Fix the Post Trim (70x35x350.C) to the bottom of
the Gazebo Wall Posts.
On the base of the wall posts, fix 2x Post Trims
(70x35x350.C) to each wall post on the outside of
the Gazebo. The angled end of this component
needs to be pointing upwards. Use 2x 70mm screws
per component to fix into position.
70x35x350.C
2 required
Step 9
Components required:
Shingles
Roof Membrane
Roof Membrane
Fully cover the roof with plastic waterproof membrane leaving a
minimum of 30mm overhang. Use a staple gun or tacks to
secure the membrane to the roof boards.
Fix the shingles to the Roof.
When fixing shingles, you will be required to
position and fix the bottom row with the
cut-outs pointing towards the top of the roof.
Please overhang the shingles from the edge of
the roof boards by approximately 50mm.
Repeat this process on all 4 sides of the Gazebo.
70x35x350.C
2 required
x2 70mm screws
per post trim
50
70x35x350.C
2 required
Top of roof
For the bottom row of
shingles, the cut outs on each
strip of shingles need to be
pointing towards the top of
the roof.
70x35x350.C
2 required
Page 8