Dunster House P5-3050CANPRG Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para Mobiliário de exterior Dunster House P5-3050CANPRG. Dunster House P5-3050CANPRG 17 páginas. Leviathan lean to pergola 3.0m x 5.0m

Imprimir página

Panel CP1

60mm Screws

M10x110 Bolts

Step 1.

•

Position the Panel CP1 between the Posts as shown in the diagram below.

•

Join 2x Panel CP1, using 10x 60mm screws.

•

Connect the two panels to the Posts using 5x 60mm screws per panel and to the Beams with 2x 60mm

screws per panel.

Please Note:

•

To fit the panels the braces have to be removed.

Please Note:

•

Fix the end panels first and space the centre panel between them (option to add sealant between the panel and

the post).

•

There may be a gap between the panels, which is covered by the external and internal trims.

Assembly Steps for Wall Options

Full height wall panels assembly

M10 Shield Anchors

M10x28 Washers

View from inside

2973

2733

120

(

16 hole 80mm deep required)

** Quantity of components will vary,

depending on your purchase.

60mm Screw

•

Fix the panels into the concrete base by

drilling

and inserting the shield anchors into the

holes.

•

Fix the panels by inserting M10x110mm

bolts and M10 washers and tighten until

secure.

M10x110mm

bolt &washer

M10 shield anchor

16 holes 80mm deep (2 per panel)

Panel

Page 12

Concrete