Dunster House H3-GS4X35HEX Manual de instalação - Página 14
Procurar online ou descarregar pdf Manual de instalação para Abrigos Dunster House H3-GS4X35HEX. Dunster House H3-GS4X35HEX 17 páginas. Hexagonal utopia garden shelter
Imprimir páginaFelt
Plastic Waterproof Membrane:
Place membrane over top of roof leaving a 15-20mm overhang on each side. If membrane does not overlap whole area of
•
roof face overlap a second piece with at least a 20mm overlap. Secure membrane to roof boards using a staple gun.
Felt:
•
Starting at the lowest edge of the roof, lay the felt horizontally across the roof boards.
•
Make sure that the lowest edge of the felt overhangs the eaves edge of the roof by approximately 40-50mm, and by
approximately 50mm on the front and back edges.
•
Nail at approximately 200mm intervals.
•
Overlap by 200mm if you need to connect two rows of felt.
•
Continue laying the next layers of felt and nail into the roof boards at 200mm intervals horizontally and with 300mm
intervals vertically.
•
Overlap the layers by 200mm and we recommend you seal any joints using the optional felt lap adhesive.
•
Repeat this process on the opposite side of the roof.
20mm Clout Nails
Cut felt at
an angle.
Second layer
Cut out of felt
15-20mm Overhang
Membrane
Roof Mambrane
200mm Overlap
page 1