Dunster House Atlas P3-3040PRG Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Equipamento para relva e jardim Dunster House Atlas P3-3040PRG. Dunster House Atlas P3-3040PRG 17 páginas. Pergola 4m x 3m

Imprimir página

Assembly Instructions for Additional Wall Panels for Atlas Pergola

Components required - quantities vary depending on your purchase

Panel CP1

Step 1.

Position the panels between the support posts as shown in the diagram below. Join the panels to each other and

the support posts using 5x 60mm screws per panel side. You will also need to screw through the panels and up into the

'140x45' horizontal purlins using 2x 60mm screws per panel.

**Full height wall panels assembly**

60mm Screws

(2 per panel)

Panel CP1

60mm Screws

145

60mm Screws

M10x110mm Bolts

M10 Shield Anchors

M10x28mm Washers

60mm Screws

2990

2700

M10 shield anchor

(M16x80 deep

hole required)

Panel CP1

View from inside

145

Fix the panels into the concrete

base by measuring and drilling

16x70mm deep holes (2 per

panel) and inserting the shield

anchors into the holes. Fix the

panel by using the M10x110mm

bolts and M10 washers and

tighten.

M10x110mm

bolt & washer

Concrete

Panel

Page 03