AUDIOBYTE HYDRA X+ Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Conversor de multimédia AUDIOBYTE HYDRA X+. AUDIOBYTE HYDRA X+ 13 páginas. Digital to digital converter

Imprimir página

AUDIOBYTE TECHNOLOGIES

BACK VIEW :

1) BATTERY SWITCH (connects or disconnects the battery from the system – removed in latest

series)

2) EXTERNAL DC INPUT (5V , minimum 1A; do not use different voltage)

3) USB input port (USB 2.0 type B port, receptacle)

POWERING UP

1) In order to use Hydra X+, installation of drivers is necessary in Windows environment. Please

choose from the driver package available for download what fits your version of Windows. ASIO package

is available. For Mac and Linux users, the device is recognized natively (no drivers are needed).

2) Turn the battery switch (1 on back view) from OFF position to ON. If you have a newer version

without on/off switch, skip this paragraph. During normal (daily) use you can let it like this all the time,

assuming that external power supply is always connected to Hydra X+. You must switch back to OFF

position if you will not use the Hydra for a longer period of time (two weeks or so), when going into

holidays, putting the device into storage etc. All indicator LEDs should be off.

3) Connect the supplied external power supply to the mains and to Hydra X+. The unit is

completely isolated from PC, it cannot recharge from USB. To prevent over-discharge of the battery, in

newest version, the device will not start if external power supply is not connected, even if the battery is

full. If battery has enough power, the charging led (6 on front view) will remain off. If the battery is empty

it will start charging, and the charging led will be on. The device operates on external supply when

charging is active.

HYDRA X+ Owner's Manual