Duobond RL-eez Manual - Página 7

Procurar online ou descarregar pdf Manual para Ferramentas Duobond RL-eez. Duobond RL-eez 9 páginas. Windshield removal

Other operating instructions.

* Use a cover to protect the dashboard

* If the pulling tention is to high, the nylon cutting wire may tear. Slowly rewind the cutting wire

in the opposite direction, check the cause of the increased resistance and start cutting again.

* Reduce the resistance by spraying the nylon wire with a little water and soap when it is around the window.

* Only attach the suction levers to a clean and grease-free window. Ensure that it is securely in place.

* Never attach the suction levers to windows that are torn on the inside.

* No other persons may stay in the working area.

* Use only nylon cutting wire max 1.5mm thick as the cutting wire. The winch is not constructed

for steel cutting wires, entangled wires or wires with abrasive materials applied.

* Do not wrap or guide the cutting wire around body parts, objects or devices not intended for that purpose.

* Do not use the connecting cable between the winch and the power supply as a handle.

* Disconnect the connection cable from the winch for transport.

* Do not wrap the connection cable between the winch and the remote control around people or objects.

* The parts that are provided with a suction cup are only properly attached once the red line

is no longer visible on the vacuum pump. If the suction cup is not properly attached, the part will not

work properly and eventually break free.

7 of 9