Free The Tone PA-1QG Manual do Proprietário - Página 3
Procurar online ou descarregar pdf Manual do Proprietário para Equipamento de gravação Free The Tone PA-1QG. Free The Tone PA-1QG 9 páginas. Programmable analog 10 band eq graphic equalizer
Também para Free The Tone PA-1QG: Manual do Proprietário (6 páginas), Manual (16 páginas), Manual de início rápido (2 páginas), Manual do Proprietário (6 páginas)
Imprimir página
Rear Panel
INPUT LEVEL select switch
This switch is used to select
PA-1Q series input level
according to the output level of
the device connected to the
INPUT terminal. If you are
connecting an instrument level
device, set the switch to the
INPUT terminal side. Or to
connect a line level device,
set it to the OUTPUT terminal
side.
IN
INPUT LEVEL
INST
INPUT terminal
Used to connect a
guitar/bass, another
instrument, effects
unit, etc. This
OUTPUT terminal
terminal has the HTS
circuit that keeps
Use this terminal to connect to your
sound texture the
amplifier/mixer, etc.
same when the effect
is turned on and off.
4
POWER DC 9V IN terminal
For connecting an AC adapter
with 9V DC center negative
polarity. Requires at least
200mA of available current.
721A001
OUT
DC9V IN
MIDI IN
MIDI OUT/THRU
LINE
MIDI IN & OUT/THRU terminals
Used to send/receive MIDI signals
to/from a connected external MIDI
device. The external MIDI controller
can switch PA-1Q series presets and
receive/send preset data from/to the
PA-1Q series.
Recalling a Preset →P.6
Transmitting Data to/from an
External Device →P.10
Adjusting Equalizer
You can create your favorite tone by adjusting various parameters.
Adjusting the equalizer
1. Press the ON/OFF switch to turn on the LED above it.
◀▶
2. Press the
cursor key switch to select the frequency to be adjusted (blue dot) in the equalizer display.
3. Turn the PARAMETER encoder to adjust the boost amount of the selected frequency.
NOTE
The boost amount of the selected frequency is adjustable in the range of ±12 dB. The selected frequency is shown
in the equalizer display. The boost amount for the selected frequency is shown in the LEVEL display.
Double-clicking the PARAMETER encoder resets the boost amount of the selected frequency to zero. The previous
value returns by double-clicking the encoder again.
Adjusting a preset's volume
1. Press the ON/OFF switch to turn on the LED above it.
◀▶
2. Press the
cursor key switch to select the OUTPUT (green dot) in the equalizer display.
3. Turn the PARAMETER encoder to adjust the volume for the preset.
NOTE
The preset's volume is adjustable from 0 to 127. The preset's volume is shown in the LEVEL display. When all of
the frequencies of the equalizer are set to boost amount 0, unity level is obtained with the LEVEL value 100, and
when the value is 127, the volume can be increased up to +12 dB.
Double-clicking the PARAMETER encoder resets the volume back to 100. The previous value returns by double-
clicking the encoder again.
5