Duolabs Season Wireless Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Duolabs Season Wireless. Duolabs Season Wireless 14 páginas.

Season Wireless – User Manual

www.duolabs.com

Click Read ATR to quickly display only the ATR that has to be sent to the

remote device.

Click Logger or Season in the Setting Mode pane to temporarily select an

operating mode. If you disconnect the Slave from the power supply, the

default operating mode is resumed. Before selecting the desired mode, it is

necessary to make sure that the Slave is powered and able to establish a radio

link, as during the reading of the initial settings.

To be able to use the Logger mode, you need to insert a smartcard in the slot

of the Slave. The Master is designed to receive the flow of data exchanged by

the smartcard and reader, and captured by the Slave.

In the Option Mode pane you can decide whether to enable or disable the

echo (Enable ECHO / Disable ECHO) of the bytes sent from the PC to the

Master. By default, the echo is always enabled when you switch the Master on

and it is not possible to save it as default configuration (unlike the settings

described above).

The byte echo is important because it guarantees full compatibility with the

software applications that are already used with Season Logger 2.

The Signal Function pane displays the options that you can use to check if

the Slave and Master are communicating correctly.

You can click Check Connection at any time to verify if the Slave and Master

are communicating correctly through the radio link. You can also click

Coverage Check to start the loop testing cycle that enables you to check the