Free2Move eSolutions Annex Manual de instalação - Página 6

Procurar online ou descarregar pdf Manual de instalação para Carregador de bateria para automóvel Free2Move eSolutions Annex. Free2Move eSolutions Annex 11 páginas. Advanced functionalities setup
Também para Free2Move eSolutions Annex: Manual de instalação (14 páginas)

Imprimir página
2.1.1

ENERGY METER CONFIGURATION

1.
Enter the menu by tapping&holding for 1.5 second the central display button for
three-phase meter (or the lower part of the display for single-phase), until the
page with the password is shown. Skip to the next page by pressing press both
left and right (or upper and lower) display button.
2.
Now tap on the left (or upper for single-phase) display button to navigate menu.
3.
To configure the Gavazzi Meter, enter the parameters by tapping&holding the
central (or lower for single-phase) display button and change them with the left
(or upper for single-phase) button:
a.
b.
c.
d.
4.
To configure the Finder Meter select COMMUNICATION command (COMM on
single-phase meter), press and hold to enter the menu. Here set:
a.
b.
c.
d.
5.
In addition to the configuration described in point 4, for three-phase Finder
Meter only, select INSTALLATION, press and hold to enter the menu. Set:
a.
Installation manual - Annex
System mode: 3Pn (For three-phase meter only)
Device address: 1
BaudRate: 38.4 kbps
Parity bit: Even
Device address: 001
Bits per second (baud): 38400 bit/s
Parity: Even
Stop bit: 1
Connection mode: 3L+N "Arithmetic"
Do not try to install the Power Meter if you are not qualified as
a professional electrician. Such behavior can cause serious danger
and harm to you and to the people, things or animals around you.
A d v a n c e d f u n c t i o n a l i t i e s s e t u p
6