AudioCodes MP-504 Manual de instalação do hardware - Página 15

Procurar online ou descarregar pdf Manual de instalação do hardware para Porta de entrada AudioCodes MP-504. AudioCodes MP-504 20 páginas. Analog voice gateway

AudioCodes MP-504 Manual de instalação do hardware
5. Cabling the Device
To connect the copper GbE WAN port:
1.
Connect one end of a straight-through RJ-45 Ethernet cable to the
WAN GE (located on the rear panel).
2.
Connect the other end of the cable to the WAN network (e.g., ADSL or Cable modem).
5.2

Cabling FXS Analog Interfaces

The procedure below describes how to cable the device's FXS interfaces. FXS is the interface replacing
Private Branch Exchange (PBX)—and connects to analog telephones, dial-up modems, and fax
machines. The FXS is designed to supply line voltage and ringing current to these telephone devices.
Warnings:
Figure 11: Cabling the WAN Copper GbE Port
The device must be installed and located only indoors.
Connect the FXS ports only to certified phone devices; otherwise, damage to the
device may occur.
Keep phone (FXS) cabling routed only within the building away from any power
cabling.
Routing FXS wiring outside the building may damage the port due to surge
phenomena.
The FXS ports are considered ES2 (TNV-2); avoid contact with any exposed wiring.
- 15 -
MP-504/8
Blue
RJ-45 port labeled S0 /