FREECALL ipcall-200 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Telefone IP FREECALL ipcall-200. FREECALL ipcall-200 13 páginas. For dhcp router user only
Também para FREECALL ipcall-200: Manual de instalação rápida (2 páginas)

Imprimir página

Fig.1

If you have a PC to share the network connection, make a connection as the

Fig.2 as below.

Fig.2

Step 4:

First, disconnect the Ethernet cable of Modem from the computer and attach it to

the WAN port on the back of IPcall-200 phone. Next, use the attached Ethernet cable

in the package to plug-in the LAN port on the back of the phone and the other end to

your computer. You can ignore this step if you have no computer to be used in the

same network. Your IP Phone shares a network connection with your computer now.

Step 5:

Slide the Power switch on the rear of the phone to ON, LCD screen will displays

"Initializing...".until the real time clock to show the current date, time and the Banner

of "COMPUTEC IPCALL or IPcall-200". Now your phone is ready to be modified

against for personal setting of MODEM.

If your LCD screen might displays like "WAN Disconnected" , you need to check

the network connection or if the Cat-5 plugged in the proper port correctly. In case

LCD shows "Initializing Failed", you nee to check what kind of the current

broadband protocol is using. You may check the following paragraph to compare the

current setting. If you are sure that a DHCP router is not used and the IPcall-200 is

connected to the ADSL / Cable Modem directly already, you can follow the next

paragraph to complete the setting.

2.2. Initial Setting

This Phone supports ADSL / Cable Modem that was supplied by your local ISP

provider. In fact, the CPU in the phone does able to configure all of necessary setting

of DHCP automatically by default since power-up for Router users. For a modem user,