Duplex JET VAC ALPHA Manual - Página 15
Procurar online ou descarregar pdf Manual para Aspirador de pó Duplex JET VAC ALPHA. Duplex JET VAC ALPHA 20 páginas.
Também para Duplex JET VAC ALPHA: Manual do utilizador (17 páginas)
Imprimir página9.
BEFORE REFERRING TO THE TECHNICAL SERVICE
PROBLEM
MACHINE DOES NOT
PRODUCE STEAM AND
VACUUM DOES NOT WORK.
THE RED "LOW WATER"
INDICATOR (2) LIGHTS UP.
SUCTION POWER IS MISSING.
WATER LEAKS THROUGH THE
CONNECTIONS OF THE
ACCESSORIES.
STEAM DOES NOT COME OUT.
DROPS OF WATER COME OUT
OF THE ACCESSORIES
NOISE INSIDE THE GENERATOR.
ACCESSORIES DO NOT FIT
PERFECTLY
POSSIBLE CAUSE
LACK OF POWER.
ALL THE WATER HAS BEEN CONSUMED.
A.
LACK OF POWER TO THE
VACUUM CLEANER.
B.
THE VACUUM TUBE IS
OBSTRUCTED.
C.
THE VACUUM DRUM (12) IS
FULL OF WATER.
CHECK THE WEAR OF THE
O-RING.
A.BOILER HAS NOT REACHED YET
THE OPERATIONAL PRESSURE
(GREEN LIGHT (3) IS OFF).
B.
STEAM COMMAND SWITCHES (36-
37) ARE OFF.
A) THE STEAM COMMAND SWITCH (34)
HAS NOT BEEN USED..
AT BEGINNING OF WORK WATER
CONDENSES IN THE TUBES AND
ACCESSORIES DUE TO THE
DIFFERENCE IN TEMPERATURE.
WHILE
COOLING DOWN, THE BOILER,
AFTER 6-7 HOURS, IS CREATING AN
INTERNAL DEPRESSION, WHICH AT EACH
IGNITION, PROVOCES SOME VIBRATIONS..
THERE IS DIRT BUILD UP IN THE JOINTS
AND LOCK/RELEASE LATCHES (40).
15
JET VAC ALPHA
REMEDY
MAKE SURE PLUG IS WELL INSERTED (1)
AND THAT THERE IS MAIN POWER TO THE
OUTLETS.
REFILL THE WATER TANK (5A) WITH
CLEAN WATER.
A.C) MAKE SURE THE SWITCH (18) IS
ON AND THE PLUG (20) IS WELL
INSERTED. (10)
B.B) CLEAN TUBE AND ACCESSORY
USED.
C.EMPTY THE VACUUM DRUM (4).
CLEAN AND LUBRICATE THE O-RING WITH
GREASE.
IF NECESSARY, REPLACE WITH ONE
SPARE SUPPLIED.
A.
WAIT A FEW MINUTES.
B.
SWITCH ON THE STEAM
COMMAND SWITCHES (36-37).
C.
USE THE STEAM COMMAND
SWITCH (34) TO ACTIVATE THE
STEAM FLOW..
AFTER
A FEW MINUTES OF USE THIS
PROBLEM WILL CEASE. IF IT CONTINUES,
PROCEED TO THE CLEANING OF THE
BOILER.
WAIT FOR THE PRESSURE STABILIZATION
(ABOUT2-3MINUTES),THENOIS
DISAPPEARS.
CLEAN AND LUBRICATE THE JOINTS.
DUPLEX