AudioControl DQ-61 Manual - Página 16

Procurar online ou descarregar pdf Manual para Conversor de multimédia AudioControl DQ-61. AudioControl DQ-61 19 páginas. Six channel line output converter with signal delay, equalization and accubass for interfacing with factory installed audio systems

Imprimir página

AccuBASS

Factory installed amplifiers and woofers are generally not designed to repro-

ducing bass at medium to high volumes. Car manufacturers filter the bass out

of the signal as you increase the volume in an effort to protect factory-installed

speakers. That's why we developed the patent pending AccuBASS

After a quick and easy one-time setting, the AccuBASS

bass just as the factory system rolls off. You get smooth, seamless, rock solid

bass response regardless of volume

Setting AccuBASS For Optimum Bass Performance:

AudioControl's patent pending AccuBASS circuit

correcting for bass roll-of

volume on your factory source unit until you hear the bass start to drop out in

relation to the high frequencies. Stop and go to the next step.

4Turn the Threshold control clockwise until you hear the bass come back up.

5Use the level control to fine-tune the amount of bass remix you want.

•

Smooth, more or less.

You're done! Now, every time your source unit gets to that level, the

AccuBASS

all volumes, and with the level control you can even give it a little extra kick if

you want. Your music your way!

will take over and re-equalize the bass. Smooth seamless bass at

circuit.

circuit takes over the

After you have hooked up

the system and are playing

music, play some tracks

with good bass lines, and

set the volume at low.

1 On the DQ-61, set the

AccuBASS Level to 12:00

and set all the EQ controls

to flat

2 Turn the Threshold

all the way down (approxi-

mately 7:00)

3 Gradually increase the

page 16