AudioControl LC5i PRO Manual de início rápido - Página 8

Procurar online ou descarregar pdf Manual de início rápido para Conversor de multimédia AudioControl LC5i PRO. AudioControl LC5i PRO 13 páginas.

Signal Bus

The Signal Bus switch allows you to combine multiple input

signals to a single channel output. It is typically used when

connecting to a "premium" factory system that has crossed-

over speaker outputs for various speakers. You can use the

Sum/Bus function to sum signals together to create a full range

output. Or, if the factory source only has front and rear full range output,

the Signal Bus can be set to route (bus) the audio signal from Channel 2 to

Channel 3 for that much-needed subwoofer channel.

Below are some diagrams of typical scenarios of how you can setup your LC5i PRO

FRONT

REAR

In this example both Signal Bus switches are set to the default setting of

Sep. (separate). There is no combining or routing of signals. What goes into

the Channel Input comes out the corresponding Channel Output.

FRONT

REAR

Add a sub channel to a 4 channel system by setting Channel 2 to Sum/Bus. This

will split and route the signal on Channel 2 to the Channel 3 Outputs.

FRONT

90Hz

REAR

HIGH PASS

90Hz

LOW PASS

To sum a high pass and low pass signals to get a full range signal, set both

channels to Sum/Bus. (Looks confusing on paper, but trust us, it will sound great)

FRONT

REAR

SUB

FULL RANGE

Quick Start Guide