Freedom Freedom 200+p Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Alarme para automóvel Freedom Freedom 200+p. Freedom Freedom 200+p 7 páginas.
Imprimir páginaexpires, the countdown stops, and will reset to start again when the door is reclosed. When
programming, at Step #5 in Features Programming Mode press the transmitter's large button
to turn this Feature on or press the small button to turn this Feature off.
4) Doors Lock With Last Door Arming: (Default OFF) If this Feature is turned on, and
the previously explained Last Door Arming Feature is on, the doors will also lock when the
security system becomes armed 30 seconds after shutting the last door. When programming,
at Step #5 in Features Programming Mode press the transmitter's large button to turn this
Feature on or press the small button to turn this Feature off.
5) Automatic Rearming: (Default OFF) On occasion, people have accidentally
disarmed their security system by unknowingly pressing the transmitter's button while it is
in a purse or pocket. This Feature prevents such accidental disarming. When this Feature
is on, upon disarming the system, a 90 second Automatic Rearming countdown will start.
During this countdown the Status LED will flash rapidly until any point of entry is opened;
for example, opening the trunk will temporarily suspend the Automatic Rearming process
(steady LED) until reclosed. However, if a door is opened or the ignition switch is turned
"on" the Automatic Rearming will be cancelled. At the end of the 90 second period the
system will automatically arm itself, at which time the system will chirp the siren and flash
the parking lights once. Three seconds later, the Status LED will flash slowly, indicating
a fully armed system. The locking of the doors upon rearming is programmed by the next
Feature. When programming, at Step #5 in Features Programming Mode press the
transmitter's large button to turn this Feature on or press the small button to turn this Feature
off.
Programming Mode press the transmitter's large button to turn this Feature on or press the
small button to turn this Feature off.
10) Open Door Bypass For The Previous Feature: (Default ON) If this Feature is on,
the system will check the vehicle's door circuit. If it detects that any of the vehicle's doors
are open at the time of the ignition being turned "on" or "off", the doors will not
automatically lock when the ignition switch is turned "on", or automatically unlock when
the ignition switch is turned "off". When programming, at Step #5 in Features Programming
Mode press the transmitter's large button to turn this Feature on or press the small button to
turn this Feature off.
11) 30 or 60 Second Activation Duration: (Default 60 Seconds) This Feature selects
the length of time that the siren sounds and the parking lights flash when the security system
is activated. This Feature is useful where laws or noise ordinances requires shorter siren
times for noise restrictions. When programming, at Step #5 in Features Programming Mode
press the small transmitter button to select the 30 second duration time or press the
transmitter's large button to select the 60 second duration time.
12) Double Unlock Pulse: (Default OFF) This Feature allows the security system to
unlock the doors in certain vehicles with some of the newer doorlocking systems. This
Feature is included for the benefit of the installer, who can determine if it is necessary for
the Double Unlock Pulse Feature to be activated.
Page - 21
Page - 23
6) Doors Lock With Automatic Rearming: (Default OFF) If the previous Feature is
turned on, this Feature determines whether the doors will also lock when the security system
becomes armed 90 seconds after disarming from Automatic Rearming. When program-
ming, at Step #5 in Features Programming Mode press the transmitter's large button to turn
this Feature on or press the small button to turn this Feature off.
7) Steady Siren Or Pulsed Horn Output: (Default Steady Siren) Instead of the
included electronic siren, if preferred the vehicle's existing horn may be used for the security
system's audible responses. If the vehicle does not utilize an existing horn relay, one must
be added or this output's 1 Amp capacity may be exceeded, which will damage the system's
control module. When programming, at Step #5 in Features Programming Mode press the
transmitter's large button for the Pulsed Horn output or press the small button to set this
Feature for Steady Siren output.
8) Horn Confirmation Honk Loud Or Soft: (Default Soft Confirmation Honk) If the
previous Feature is utilized, due to the variety of vehicle horns, the arming and disarming
confirmation honks may adjusted with this Feature. When programming this Feature, at
Step #5 press the large transmitter button to select the Loud Confirmation Horn Honk. Press
the smaller transmitter button to select the Soft Confirmation Horn Honk.
9) Ignition On / Off To Lock / Unlock Doors: (Default ON) If this Feature is on, the
doors will automatically lock 2 seconds after the ignition switch is turned "on", and unlock
instantly when the ignition switch is turned "off". When programming, at Step #5 in Features
13) Open Door Arming Alert: (Default OFF) If this Feature is utilized, if one of the
vehicle's doors is open when the security system is armed via the transmitter, the siren will
chirp 3 times and instead of once and the parking lights will flash 3 times instead of once
upon arming the system. When programming, at Step #5 in Features Programming Mode
press the transmitter's large button to turn this Feature on or press the small button to turn
this Feature off.
14) Disarm System Upon Trunk Release: (Default ON) This Feature adds the con-
venience of automatically disarming the security system when the small button is pressed
and held to operate remote trunk release. If this Feature is turned off, the trunk release will
still operate, but the system will not disarm. When programming, at Step #5 in Features
Programming Mode press the transmitter's large button to turn this Feature on or press the
small button to turn this Feature off.
15) Transmitter Activated Anti-Carjacking: (Default OFF) This Feature adds Anti-
Carjacking protection, which can be activated from the transmitter at any while the ignition
is "on". To activate this Feature, press and hold both transmitter buttons for 3 seconds. The
siren will start chirping 53 seconds later, and for the next seven seconds the Valet Switch
must be pressed once to cancel the Anti-Carjacking Feature. At 60 seconds the siren will
fully sound, and the parking lights will also flash. At 90 seconds the starter interrupt output
will activate. Once the siren sounds and parking lights flash, Anti-Carjacking cannot be
canceled unless the ignition is turned "off", then back "on"; then the Valet Switch must be
pressed once within 10 seconds of turning the ignition back "on". This is the only way to
Page - 22
Page - 24