DupliM 13010 Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Duplicador de discos DupliM 13010. DupliM 13010 2 páginas. 1:5 ssd/hdd copy tower sata, 1:11 ssd/hdd copy tower sata.
Imprimir páginaGetting Started
Loading the Hard Drives
1. Open the drive tray doors by lifting the tab on the left side of each drive bay you wish to use.
2. Take the Hard Disc Drive (HDD) and align the drive's SATA plug to the lower right hand side of the drive bay.
3. Slide the HDD into the drive bay until it stops. The drive will still be about 1 inch outside of the bay. When the door
is closed it
will push and plug the HDD into the duplicator.
4. Swing the drive bay door closed and press the left side of the door until the tab latches. When it latches, a click can
be felt and heard. Note: If you are duplicating, the source hard disk drive goes in the top bay.
Copy HDD
The "Copy" function performs a copy from a source HDD to one or more target HDDs. The target HDDs must be at
least as large
as the source. The HDD Copy Cruiser High-Speed will copy every block of capacity on the source HDD.
1. Load the source HDD and the target HDDs into the HDD Copy
Cruiser High-Speed. The system will auto-detect the hard
drives. After the drives have been detected, a screen similar
to the one to the right will be displayed.
Note: Before copying be sure that the capacity of the target HDD is equal to or larger than the source hard drive.
2. Press OK to start copying. The system will auto-detect the hard drives. The following information will be displayed.
Detect Drives
Please wait...
Analyzing Source
3. During the copy process the HDD Copy Cruiser High-Speed
will display progress information.
Note: The copying speed, capacity and duration may vary
from one hard drive to another.
4. Once duplication is complete, a job status screen will be
displayed.
Please refer to the User Guide found on
the disc for more detailed information.
Technical Support Addresses and Phone Numbers
• By e-mail: [email protected]
• By Telephone: 1-818-678-0484 – FAX at: 1-818-678-0483
• Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through
Friday, excluding U.S. holidays.
Please try to call from a phone near your computer system.
©
2022 DupliM Inc. 21722 Lassen Street / Chatsworth, CA 91311 U.S.A.
Specifications subject to change without notice.
OK
ESC
OK
ESC
DupliM
1. Copy
Searching Source
Copy 50.9 G
1 Target Ready
Copy 16
50.9 G
7:35
26%
13.5 G
Pass: 1
Fail: 0
Time: 20:18
Document Number: 130100-130101 ENG QSG Rev A
OK
ESC
OK
ESC
OK
ESC
OK
ESC
OK
ESC