AEV Roof Rack Manual de instalação - Página 3
Procurar online ou descarregar pdf Manual de instalação para Acessórios para automóveis AEV Roof Rack. AEV Roof Rack 13 páginas.
Imprimir página
part i. Platform assembly
1
Fit Corner T Mouldings to the Frame End extrusions. A
rubber mallet can be used to carefully tap the Moulding
in place.
M5x16mm Plastite Screws.
3
3
onto planks and fasten together using hardware supplied.
onto planks and fasten together using hardware supplied.
Do the same for the other end.
Do the same for the other end.
5
5
Place side extrusions upside down in position, slide corner mouldings onto T moulding and into extrusion simultaneously.
Place side extrusions upside down in position, slide corner mouldings onto T moulding and into extrusion simultaneously.
M5x16mm Plastite Screws.
M5x16mm Plastite Screws.
M6x16mm Dome Socket
M6x16mm Dome Socket
Head Screw.
Head Screw.
M6 OD 12.5mm Flat Washer.
M6 OD 12.5mm Flat Washer.
2
Fit the Plank Inserts into end of plank at both ends.
Orientation of inserts is critical. Carefully tap the Inserts
into place with a rubber mallet.
Holes face out.
Faces into Plank.
4
4
Fit all four cover plates to corner mouldings as shown.
Fit all four cover plates to corner mouldings as shown.
M5x16mm Plastite Screw.
M5x16mm Plastite Screw.
Corner Moulding Cover.
Corner Moulding Cover.
Corner Moulding.
Corner Moulding.
Nyloc Nuts must face up.
1