Freedom ELECTRONICS Ovation 2 FE-24 Manual de instalação - Página 6
Procurar online ou descarregar pdf Manual de instalação para Impressora Freedom ELECTRONICS Ovation 2 FE-24. Freedom ELECTRONICS Ovation 2 FE-24 10 páginas.
Imprimir página
FE-24 Printer
13. Mount the FE-24 printer onto the
printer bracket the same way the DW-
14/Zebra printer was mounted. Feed
the slack in the cables through as
needed.
• Reinstall the printer bracket if
removed in step 8.
14. Slide the printer/bracket forward
towards the front of the dispenser.
• Make sure that the printer is flush
against the printer door and pressed
up against the (2) allen screws.
*Failing to do so will result in printer jams.
15. Loosen, but don't remove, the two
Allen screws of the printer bracket
mounts. Located between the printer
and the Unit Price Display board.
16. Mount the FE-24 PCB(FW00001_FE24)
by sliding it into place using the two allen
screws and tighten the screws.
Freedom Electronics: FE-24 Install
6