Duplomatic EWM-BUS-DD series 10 Manual de arranque - Página 5
Procurar online ou descarregar pdf Manual de arranque para Equipamento de gravação Duplomatic EWM-BUS-DD series 10. Duplomatic EWM-BUS-DD series 10 8 páginas. Can coupler
Imprimir páginaEWM-BUS-DD/10
Characteristics
This card is a Profibus/CANbus coupler for systems up to 24 axes.
It allows the data exchange between a CAN network and PROFIBUS PLC, through a built-in
interface inside one housing.
The EWM-BUS-DD, combined with cards for axes control like EWM-SS-DAD (catalogue 89460),
allows to design synchronization systems with CAN communication on the axes network side, and
with PROFIBUS communication on PLC side.
7-segment display makes diagnosis and commissioning easier.
Configure the CAN communication by DIL-switches. For PROFIBUS setting, load the .GSD file
(www.duplomatic.com, inside download section.)
Power supply
Current consumption
Connections
Insulation voltage
Baud rates
CAN baud rates
DP function
Profibus interface
Housing material
Dimensions
Connectors
Operating
temperature range
Protection degree
VDC 24
mA
< 120 (a 24 V)
PROFIBUS: D-sub 9-pin CAN: 4-pin COMBICON plug
≥ 500 V
9,6 Kbaud to 12000 Kbaud, automatic recognition
125 Kbaud, 250 Kbaud, 500 Kbaud, 1 Mbaud
imaging of the CAN Data as I/O data of the PROFIBUS complete
diagnosis and configuration via DP master
according to DIN 19245 part 1-3
Plastic
mm 120 x 99(h) x 25(w)
2x4 poles screw terminals - PE direct via DIN rail
°C
0 / +55
IP 20 housing
Duplomatic MS ▪ EWM-BUS-DD/10 Start-up Manual – 80946/118 ETM --- Oct 2018
80946/118 ETM
| 5