Daniels Electronics MT-3 Series Manual de instalação e resolução de problemas

Procurar online ou descarregar pdf Manual de instalação e resolução de problemas para Recetor Daniels Electronics MT-3 Series. Daniels Electronics MT-3 Series 9 páginas.

Imprimir página

DANIELS

ELECTRONICS LTD.

TN100 System Installation and Troubleshooting

General Overview

Daniels radio systems are designed for operation in highly varied conditions. Your application may

require high performance radio systems (intermod and selectivity) for operation in congested radio sites,

or operation over wide temperatures using battery solar powered systems (low current drain). A synthe-

sized radio may be appropriate for your emergency communications systems, or a crystal radio may be

needed for your data application. Daniels manufactures a diverse range of radio products tailored to the

type of operation you need.

The MT-3 radio system is characterized by high performance and reliability, whether it is a remote, low

current repeater or a high performance base station. The total system is designed to provide dependable,

low maintenance performance and great flexibility for expansion and servicing.

The MT-3 series of radio and control modules are packaged in the compact Eurostandard housing with

anodized aluminum front panels, and are ruggedly designed for remote or transportable applications. All

of the modules use high reliability components and corrosion resistant fasteners.

The MT-3 radio system is specifically designed to deliver high performance under adverse conditions.

Voltage stress testing and a 24 hour burn-in is performed on the radio system and performance of the sys-

tem at room temperature (25

testing can be conducted over the temperature range - 40

ensure compliance with the design specifications.

A Daniels MT-3 radio system consists of seperate RF receiver and transmitter modules plugged into a

standard 19" subrack. Each subrack also requires a control card and system monitor. External connec-

tions to the system (COR, PTT, audio, channel select, etc.) are made through an auxiliary connector on

the rear of the subrack. An optional cable or terminal strip connector is available to connect externally

through the auxiliary connector to the radio system. Most internal connections and control functions

(audio routing, COR - PTT, CTCSS, hang timers) are controlled by the audio control card. Contact the

factory for more information on the many custom configurations possible.

43 Erie Street

Victoria, B.C.

Canada V8V 1P8

TN100 Rev 3-0-0 Sep 08

° °

C) is documented and measured. As an option, extensive environmental

Toll Free

Canada & U.S.A.

Phone:

1-800-664-4066

Fax:

1-877-750-0004

TECHNICAL NOTES

MT-3 Radio Systems

° °

C to + 60

C and the performance measured to

International

Phone:

250-382-8268

Fax:

250-382-6139

Internet

e-mail:

[email protected]

web:

www.danelec.com

Page 1 of 9