Danish Interpretation Systems AO 6008 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Sistema de conferência Danish Interpretation Systems AO 6008. Danish Interpretation Systems AO 6008 18 páginas. Digital conference system audio output unit with firmware 5.3.5 or later

Imprimir página
Danish Interpretation Systems
Channel setup menu
If the "Channel setup" entry is chosen the Channel
menu is shown:
-Out A: 12Polish
-Out B: 13Albanian
-Out C:
2English
-Out D:
5Danish
An entry can be changed by selecting it with the
select keys. This is marked by an ">" to the left of
the entry:
-Out A: 12Polish
-Out B: 13Albanian
-Out C:
2English
>Out D:
5Danish
Now the language can be toggled up or down with
the arrow keys. The change is accepted with the
ENTER key or discarded with the MENU key. The
channel can be adjusted between "Floor 2, Floor 1,
Floor" as the lowest channel up to the number of
open interpreter channels.
The Channel menu is left with the MENU key.
Floor output
There are 3 floor outputs available at the Channel
menu:
Floor
Automatic gain controlled output
Floor 1
Loudspeaker audio, unregulated
Floor 2
Loudspeaker audio, regulated
Volume setup menu
By pressing the Volume button from the Set-up
menu the user gains access to the Volume menu:
-Out A (12POL): -12 dB ▲
-Out B (13ALB): +15 dB
-Out C ( 2ENG):
-Out D ( 5DAN):
From this menu it is possible to change the volume
setting for each channel individually from -40 dB to
+15 dB in steps of 1 dB. When selecting Off the
output is muted.
10
▲
▼
▲
▼
0 dB
+7 dB ▼
Manual 01 18 04440
The volume level for a specific output is changed in
the same way as the language setting by pressing
one of the four SELECT buttons. The changes are
applied instantly to the audio when the up/down
keys are pressed so the user can check the volume
level while adjusting it.
The last item on the volume menu list is "All" by
selecting this item the user can change the volume
setting for all the outputs simultaneously. The
outputs are all set to the value selected in this menu
item.
Pressing the MENU button leaves the volume
menu. This brings back the Set-up menu.
Headphone setup menu
The Headphone setup menu gives access to the
headphone settings.
-Headphone monitoring: A
-Headphone volume: -20dB
The "Headphone monitoring" entry indicates the
analogue output from which the audio for the
headphones are taken. It is altered by selecting it
and using the up/down keys. Range is A..H.
Headphone volume adjusts the level of the
headphone monitoring output (this attenuation is
applied to the channel output which is already under
volume control). Range is 0dB .. –62dB (Off is
mute) in steps of 1 dB. It is selected and altered in
the same way as the "Headphone monitoring" entry.
Communication status menu
By pressing the key next to the Communication
Status item the user is taken to the Communication
status menu:
Rx Errors:
Tx Retries:
Tx Dropped:
-Reset counters
From this menu the user can view the error status of
the unit and reset the error counters. The error status
User Manual
0
0
0