ConSenses Accelerometer BA Series Manual de instruções de montagem - Página 10
Procurar online ou descarregar pdf Manual de instruções de montagem para Equipamento industrial ConSenses Accelerometer BA Series. ConSenses Accelerometer BA Series 14 páginas.
Imprimir página4. Conditions and Preparations on Site
Ensure that the accelerometers BA are protected from adverse conditions such as salt water, snow, rain. or
ice.
Protect the contact points from contamination and do not touch the terminals.
A constant temperature within the operating range affects the sensitivity of the accelerometers only to a small
extent.
You should avoid using the accelerometer in extreme humidity (>90 % relative humidity, or thawing atmos-
phere). Accelerometers with connected signal cable have protection class IP67 according to DIN EN 60529.
This protection class is only guaranteed if the connector is properly mounted on the accelerometer.
The accelerometer is made of stainless steel. Ensure that the accelerometers do not come into contact with
chemicals that can attack the surface. Protect the signal cable from aggressive chemicals. Acids and other cor-
rosive substances release ions that can cause the accelerometer to fail. In this case, please initiate appropriate
protective measures.
Note: Contaminated, painted or damaged screw connection points prevent sustainable mounting of the accel-
erometers. Ensure that the installation location is level to allow the sensor to be mounted flat.
Page 6
Accelerometer Assembly Instructions