Audionet EPS Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Fonte de alimentação Audionet EPS. Audionet EPS 13 páginas. Enhanced power supply
Também para Audionet EPS: Manual do Proprietário (7 páginas)

Imprimir página

Usage

5.1 Powering up

First of all, please make sure your EPS is connected correctly to the

mother unit and the mains (see section 'Mains connection' on page 8 and

'Connecting the mother unit' on page 9).

The EPS is a stand by unit. Please operate the mains switch 1 on the

back panel to put the EPS in stand by mode.

Only in cases of extended absence (like vacations) or if massive trouble

on the mains power is to be expected (e.g. thunder storms) it is recom-

mended to disconnect the EPS from the mains. To disconnect the EPS

from mains completely, you have to pull the mains cord off the mains

jack 2 .

Important

Never pull the mains cord while the EPS or the mother unit is

switched on! Before you pull the mains plug, power down the

mother unit to stand-by mode and switch off the EPS on the back

panel.

5.2 Switching on/off

Please operate the mains switch 1 on the back panel to put the EPS in

stand by mode.

The position of mains switch of mother devices that need no additional

mains connection (see section 'Connecting the mother unit' on page 9) is

negligible. All other mother devices must be switched on.

Now operate the mother device as usual, all functions are the same. If the

mother device is switched on, the LED on the EPS front panel is acti-

vated.

If you switch off the mother device, the power LED of the EPS turns off.

Note

For further information on starting up a mother device with 5-pin

connector in combination with an EPS please consult the user's man-

ual of the mother device.