DanPure LUXE 75 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Dispensador de água DanPure LUXE 75. DanPure LUXE 75 8 páginas.

3. Installation Method

1) Open the package to check whether the product has been damaged

2) Find a three way ball valve in the accessories pouch which is made of

metal. Connect it to the municipal tap water 1/2" piping system

3) Find a 1/4"PE

pip;

connect it with the side hole of the three way ball valve

4) Connect the other end of the 1/4"CCK pipe to the water inlet hole. Cut

off the CCK pipe about 20-30cm from the machine and connect the mid

ball valve (in the accessories pouch) between these two CCK pipe

5) Connect the power plug to the plug base.

6) Turn on the water inlet valve and power switch

fully filled with water and drain all water

normally.

adjust the feet to

stabilize

the machine

4. Maintaining

4.1 water tank cleaning

a. Connect one side of the CCK tube to the water inlet and the other side to

water tap with a ball valve and a tri-way socket.

b. Plug in, and turn on the water inlet valve, then inject a proper amount of

water in to the water tank

Note: because it will take 3-5 hours for RO system to fill the reservoir

can also take along a few jugs of freshly prepared RO water from your unit

to fill the reservoir for faster rinsing.

4.2 Clean the drip tray

Take out the drip tray vertically, empty it for waste water and clean it.

Wait for the water tank

do it again. Then you can use unit

connect

the ball

valve

Drain all the water

and then do it all over again.

connec

the PE tube to

input connection

you