audiophony 9836 RUNNER-102 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo audiophony 9836 RUNNER-102. audiophony 9836 RUNNER-102 12 páginas. Runner series

Imprimir página

English

6 - 2 : Replacing the RUNNER batteries

Black

Red

Notes :

- Caution: Please make sure to position the batteries properly, as described on Figure 2, as your device can be

damaged by an improper positioning.

- New batteries must be fully recharged before being used. The green indicator flashes during the charging

process and the FULL indicator remains lit when the battery is fully charged.

6 - 3 : Precautions and recommendations concerning the batteries

1 - This device features a 12 V / 2.7 Ah battery allowing an average battery life of 4 hours.

2 - The complete charging process duration is approximately 3 hours.

3 - A built-in power management system indicates if the battery needs to be charged.

4 - If the battery level gets too low, the «LOW» indicator alone will light up, please plug your unit to an electrial

outlet or replace the batteries.

5 - Used batteries must be taken care of properly. Do not dispose of them in the environment.

6 - In order to preserve the battery, please completely turn off your device when not using it.

7 - We strongly recommend to remove the battery during long periods of non-use.

8 - The battery must be charged regularly to prevent it from drying and becoming unusable.

9 - The battery is considered as wearing part and is not covered by the warranty.

Page 10

RUNNER - 100W BATTERY-OPERATED MODULAR SOUND SYSTEM

AC 10

0- 24

ON /O

Ch ar

ge ON

/O FF

Ex t.S

1 - Turn OFF your RUNNER.

2 - Open the rear access hatch as described on

Figure 1.

3 - Remove the used batteries.

4 - Install the new batteries in their compartment.

5 - Position the batteries as described on Figure 2.

6 - Make sure the battery is in position and close

the hatch.