audiophony MOJO1200LINE Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Sistema estéreo audiophony MOJO1200LINE. audiophony MOJO1200LINE 10 páginas. 1200w amplified system with subwoofer and column + dsp + bluetooth
Imprimir página
MOJO1200Line - Amplified system with subwoofer and column + DSP + Bluetooth
Power input socket and Fuse
1-
Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in
amplifier. The fuse protects the power supply module and the built-in amplifier.
If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.
2 - Power switch
3- Subwoofer sound level
Allows you to adjust the sound level of the bass.
This setting also affects the main volume level.
(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).
4- Multi functions knob
Allows you to enter into each function of the DSP and make the adjustements. Please check next page for more
details.
5- Display
Show the inputs level and the differents DSP functions
6- Channels 1 and 2 input selector
Allows you to choose the type of source connected to each channel.
7- Channels sound level
Allows you to adjust the sound level of each channel.
This setting also affects the main volume level of the amplification system.
(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).
8- Input connectors
CH1 and CH2 input via balanced COMBO
Connect here an XLR or JACK plug from a line level music instrument or a microphone.
CH3 input via balanced Jack
Connect here a JACK plug from a line level music instrument like guitar
CH4/5 inputs via RCA and Bluetooth
Connect a line level instrument via the RCA. The Bluetooth
9- Balanced line output
LINE LINK
output for brodcast the channel 1 and 2
MIX OUTPUT
allow you to link another system. The level is line and signal is master mixed.
®
Bluetooth
pairing :
With the multi functions knob (4) go to BT menu and set it to ON.
®
The Bluetooth
logo is blinking quickly on the display to indicate that its searching a Bluetooth
On your smartphone or computer select the "MOJO1200Line" in the list of the Bluetooth
®
The Bluetooth
logo is blinking slowly on the display and a sound signal indicate that your device is connected.
Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for
the audience, improper settings can damage your whole sound system.
The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.
CAUTION
Beyond this maximul level, the volume will not increase but will be distorted.
Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.
First, in order to prevent that, adjust the sound level via the Level of each channel.
Then, use the High/Low equalizer to adjust the acoustic as you wish and then the Master level.
If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in
order to spread the sound output evenly.
(Mic 40k Ohms / Line 10k Ohms)
(Line 20k Ohms)
®
®
receiver is also on this channel.
English
®
®
connexion.
®
devices to connect it.
Page 5