Beldray EH0089 Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Lareira de interior Beldray EH0089. Beldray EH0089 15 páginas. Conception wall fire

Installing the Pebbles

Remove the pebbles from the packaging.

Arrange them evenly on the translucent cover over the fire bowl.

If the pebbles do not let through an even amount of light once the Conception Wall Fire has

been turned on, turn off the Conception Wall Fire at the mains power supply, allow to cool

completely and then rearrange the pebbles on the translucent surface until the desired effect has

been reached.

Using the Conception Wall Fire

STEP 1: Plug the Conception Wall Fire into the mains power supply.

STEP 2: Turn on the Conception Wall Fire by pressing the 'On/Off' switch. This will also

operate the light.

STEP 3: To operate the Conception Wall Fire, first turn on the 'Fan' switch.

STEP 4: Select the desired heat output by turning on one or both of the heat setting switches.

To operate the Conception Wall Fire at a low heat setting (1000 W), turn on the

'Heating 1' switch. To operate the Conception Wall Fire at a high heat setting, turn on

switches marked 'Heating 1' and 'Heating 2' together (2000 W).

Note: The Conception Wall Fire will only operate if the 'Fan' switch is turned on.

Note: Turning on the 'Fan' switch without turning on either of the 'Heating' switches will

operate the Conception Wall Fire without heat.

Note: Selecting the 'Heating 2' switch will have no effect on the Conception Wall Fire.

THE SCIENCE

BEHIND HEAT

centre line

mark these lines

drill hole here

EH0089 Conception Wall Fire