Dantherm CD 400-18 Manual de instruções - Página 14

Procurar online ou descarregar pdf Manual de instruções para Desumidificador Dantherm CD 400-18. Dantherm CD 400-18 19 páginas.

Buzzer

Whenever a switch is pressed, the buzzer will sound.

Be sure to open one of the flaps. If the flap is not opened fully during operation,the overheat

prevention device will work and the unit will stop operating.

Due to the protetive function for the machine,the dehumidifying operation will be started after

approx.3 minutes,when the unit is plugged in or restarted immediately after stopped.

After recovery from a Power failure," Automatic" mode lamp will flash. Press" power "switch

again to start the operation.

Efficiency of the dehumidifier is influenced by the air outside the room. For operating

efficiently, try to avoid opening and closing the windows and the doors.

For proper performance, operate the dehumidifier under the usable operating temperature. For

safety purpose, the dehumidifying operation will be stopped automatically and changed to the

air cleaning operation when the ambient temperature is higher than approx. 36 C.

Circulation of the refrigerant may cause sound within the dehumidifier when the operation is

started. After the circulation is stable, the sound will be lower.

To change the timer set

Press"Timer Select" Switch

to set the desired time.

To cancel the timer operation

Press" Timer Select" Switch

and the timer lamp will go off.

To stop the timer operation

Press "Power" switch again

■ Except "Continuous"mode operation the timer setting will be

cancelled whenever 'Mode"switch is pressed. Set the cancelled

whenever 'Mode"switch is pressed.

■The timer stops when the water tank is full of water.

After the tank is emptied, the timer will start again.

Note

Notes