AudioQuest Niagara 3000 Manual do Proprietário - Página 6
Procurar online ou descarregar pdf Manual do Proprietário para Distribuição de energia CA AudioQuest Niagara 3000. AudioQuest Niagara 3000 20 páginas. Low-z power noise-dissipation system
Também para AudioQuest Niagara 3000: Manual de início rápido (2 páginas)
Imprimir página
Installation | Unpacking
Before unpacking your Niagara 3000, inspect the carton for any obvious damage to the boxes and internal
protective materials. If internal damage is likely, contact the carrier who delivered the unit. If shipping damage is
evident on the product, then please contact your shipping carrier. Please save all shipping and packing materials.
Should you move or otherwise need to transport your Niagara 3000, these packing materials will ensure the safest
transportation.
The double box set should contain the Niagara 3000 (120V North American NEMA Edison Duplex AC Outlets),
two foam inserts, owner's manual, Quick-Start Guide, front-panel polishing cloth, rack-mount kit, and warranty
registration card. Registration is recommended. In the event that your original ownership documents are lost,
your registration can be used to establish whether the unit is within the warranty period.
Safety Information/Warnings
Before operating the Niagara 3000, please read and observe all safety and operating instructions (or, at the very
least, the quick-start sheet). Retain these instructions for future reference.
¡ ¡ Do not disassemble or in any way modify the Niagara 3000. There are no user-serviceable parts inside.
¡ ¡ Keep away from moisture and avoid excessive humidity.
¡ ¡ Do not allow liquids or foreign objects to enter the unit.
Servicing/Return to AudioQuest
Servicing of the Niagara 3000 must be performed by AudioQuest, and is only required when:
¡ ¡ The Niagara 3000 has been exposed to rain, flooding, or extreme moisture.
¡ ¡ The Niagara 3000 does not appear to operate normally. (See "Trouble-Shooting Guide. " )
¡ ¡ The Niagara 3000 has been dropped and sustained considerable physical damage.
If sending the Niagara 3000 to AudioQuest for servicing (or shipping it for any reason), please use the factory
approved packaging materials. If you have lost any of these (double carton, two foam inserts, one poly bag),
please contact AudioQuest for replacements. We will provide replacement packaging materials for a nominal
charge; shipping costs will be paid by the individual or company requesting the packaging material. Please do not
rely on other methods of packaging, including those provided or suggested by packaging/mailing stores. These
methods and materials could seriously damage the product, as well as its finish. Even the loss of the thick polybag
is enough to permanently damage the finish during transport. If you have lost the original packaging material,
please request replacement materials from AudioQuest.
Power Source
Ideally, the power source to which the Niagara 3000 is connected should be adequate for use at 120V single phase
nominal voltage, 15 amps (current capacity RMS or greater).
For proper operation, the Niagara 3000 requires a safety ground (supplied via the power utility AC wall outlet).
Placement
The Niagara 3000 is manufactured with four rubber textured polymer feet for safe, secure placement on any
table, cabinet, shelf, or floor. When rack-mounting is required, these feet may be removed with a standard Phillips
screwdriver. The Niagara 3000's design obviates the need for compliant or high-Q isolation feet. Although many
6