Constellation Pictor Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Constellation Pictor. Constellation Pictor 17 páginas. Line stage preamplifier

Imprimir página

3. XLR outputs

The inner XLR connections on the rear of the Pictor are outputs. The signal at these outputs is the same—it does not mat-

ter if you use output 1 or output 2. To remove an XLR plug, push on the tab on the connector body and pull the plug out.

Be sure to match the output to the correct channel on your amp. Looking at the back of the Pictor, the outputs on the left

side are for the right channel, the outputs on the right are for the left channel.

When XLR connections are used to connect the Pictor with Constellation Audio amplifiers, it creates the Constellation

Link—an audio interface that is, in essence, perfectly balanced. The positive- and negative-going halves of the signal will

exhibit near-zero difference except polarity.

4. RCA outputs

RCA unbalanced outputs are also supplied for amps and recording devices not equipped with XLR jacks. The signal at

these outputs is the same—it does not matter if you use output 1 or output 2.

When connecting to an amplifier, be sure to match the output to the correct channel on your amp. As you are looking at

the back of the Pictor, the outputs on the left side are for the right channel, the outputs on the right are for the left channel.

To remove an RCA plug, grasp it by the connector body and pull the plug out.