BELGACOM Maestro 1002 Manual - Página 5
Procurar online ou descarregar pdf Manual para Telefone BELGACOM Maestro 1002. BELGACOM Maestro 1002 9 páginas.
Imprimir página
Adjusting the telephone
Setting the handset volume
The handset volume can be set to
F
two levels.
Press the handset vol-
ume control key.
The primary volume is reset after
hanging up.
Mute
You can deactivate the telephone's
microphone during a call.
C
Press the mute key.
To reactivate microphone: Press the
mute key again or press any other
key.
The mute key LED flashes while the
microphone is deactivated.
Setting the ringer
You can set the ringer melody and
volume to 9 levels or turn it off
c K
(factory default: level 6).
Lift the handset, press
#
the set key.
Press the hash key.
Q
O
...
Press one of the
number keys.
(0: Ringer off until
K
handset is next lifted).
Press the set key.
Note: The LED on the mute key flashes
while the telephone is in set mode.
5
en
Operation on a PABX
Special functions/Recall key
During an external call, you can
make an enquiry or forward the call.
To do this, press the recall key
The subsequent procedure depends
on your PABX.
To set the recall key, the telephone's
flash time must be set consistent
with your PABX. Please refer to the
operating instructions for your PABX.
Changing the dialling mode/
flash time
The telephone supports the follow-
ing dialling modes:
T1: Tone dialling, flash time 100 ms
T2: Tone dialling, flash time 280 ms
P: Pulse dialling
Depending on your PABX, you may
need to change your telephone's
dialling mode or the flash time.
Temporary tone dialling switching
in "Pulse" position
To use functions that require tone
dialling (e.g. remote control of
answering machine), you can set the
telephone to tone dialling for the
duration of the call without adjust-
ing the switch.
*
After the connection is established:
After the connection is broken, the
setting reverts to pulse dialling.
H
To do this, use the slid-
ing switch below the
keypad.
Press the star key.
.