Constellation audio Inspiration INTEGRATED 1.0 Manual do Proprietário - Página 5
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Constellation audio Inspiration INTEGRATED 1.0. Constellation audio Inspiration INTEGRATED 1.0 16 páginas.
Imprimir páginaInput and output connections
1. XLR inputs
On the rear of the Inspiration Integrated are four XLR inputs, two on each side. As you are looking at the rear panel, the
left two XLR inputs are for the right channel, the right two inputs are for the left channel. Underneath each jack is the cor-
responding input number. Use of XLR connections is recommended for the best possible audio quality. To remove an
XLR plug, push on the tab above the jack and pull the plug out.
IMPORTANT NOTE: To preserve true dual-mono operation, the Inspiration Integrated uses a symmetrical circuit layout.
This configuration requires that the amplifier's back panel connections be laid out a little differently from those on most
integrated amps. For example, the left-channel connection for Input 1 is on the right side of the back panel, and the right-
channel connection is at the left side. Connecting the cables in the usual side-by-side fashion will result in an incorrect in-
stallation and the mixing of sounds from different source devices.
2. RCA inputs
These unbalanced inputs are provided as a convenience for use with unbalanced signal sources. Whenever possible, we
recommend using XLR connections instead. Connecting to an unbalanced source is handled in the same way an XLR bal-
anced source. To remove an RCA plug, grasp the plug and pull it out. Do not pull on the cable.
IMPORTANT NOTE: To preserve true dual-mono operation, the Inspiration Integrated uses a symmetrical circuit layout.
This configuration requires that the amplifier's back panel connections be laid out a little differently from those on most
integrated amps. For example, the left-channel connection for Input 1 is on the right side of the back panel, and the right-
channel connection is at the left side. Connecting the cables in the usual side-by-side fashion will result in an incorrect in-
stallation and the mixing of sounds from different source devices.
5